# Debugging level
set debug 3

# Log file: comment out to use stderr, use "syslog:facility" for syslog
set log_file "/var/log/l2tpns"

# Write pid to this file
set pid_file "/var/run/l2tpns.pid"

# This host name, if different from the OS one
#set hostname "localhost"

# Shared secret with LAC
set l2tp_secret "secret"

# MTU of interface for L2TP traffic
#set l2tp_mtu 1500

# PPP counter and timer values
#set ppp_restart_time 3
#set ppp_max_configure 10
#set ppp_max_failure 5

# Only 2 DNS server entries are allowed
set primary_dns 10.0.0.1
set secondary_dns 10.0.0.2

# Can have multiple radius server entries, but ony one radius secret
set primary_radius 10.0.0.3
#set primary_radius_port 1645
#set secondary_radius 0.0.0.0
#set secondary_radius_port 1645
set radius_secret "secret"

# Acceptable authentication types (pap, chap) in order of preference
#set radius_authtypes "pap"

# Turn on or off Radius Accounting
#set radius_accounting no

# Port for DAE RADIUS requests
#set radius_dae_port 3799

# Allow multiple logins for the same username
#set allow_duplicate_users no

# Kill timedout sessions ? (default yes)
#set kill_timedout_sessions no

# Allow multiple logins for specific username
#set guest_account ""

# Write usage accounting files into specified directory
set accounting_dir "/var/run/l2tpns/acct"

# Listen address for L2TP
#set bind_address 1.1.1.1

# Listen address for CLI
#set cli_bind_address 127.0.0.1

# Send a gratiuitous ARP for bind address
#set send_garp no

# Gateway address given to clients
#set peer_address 0.0.0.0

# Default throttle rate in kb/s
#set throttle_speed 0

# Number of buckets to allocate for throttling
#set throttle_buckets 3000

# If set to true, dump current speed to stderr every second
#set dump_speed no

# Number of packets to read from tun/udp/cluster fd when select
# returns readable
#set multi_read_count 10

# Set scheduling priority of process to SCHED_FIFO
#set scheduler_fifo no

# Lock pages into memory
#set lock_pages no

# Maximum number of host unreachable packets to send per second
#set icmp_rate 0

# Maximum number of downstream packets per 0.1s to handle for each
# session (0 = ulimited)
#set packet_limit 0

# Cluster multicast address, interface
#set cluster_address 239.192.13.13
#set cluster_port 32792
#set cluster_interface eth0

# Cluster multicast TTL
#set cluster_mcast_ttl 1

# Cluster timers (1/10th second)
#set cluster_hb_interval 5
#set cluster_hb_timeout 150

# Minimum number of slaves before master withdraws routes
#set cluster_master_min_adv 1

# IPv6 address prefix
#set ipv6_prefix ::

# BGP NEXT_HOP path attribute
#set nexthop 10.0.1.1
#set nexthop6 2001:db8::1

# Time between last packet sent and LCP ECHO generation (default 10 seconds)
#set echo_timeout 10
# Drop sessions who have not responded within idle_echo_timeout seconds (default 240 seconds)
#set idle_echo_timeout 240
# Change this value to no to force generation of LCP ECHO every echo_timeout seconds, even there are activity on the link (default yes)
set ppp_keepalive yes

# Drop/kill sessions
#load plugin "sessionctl"

# Throttle/snoop based on RADIUS
#load plugin "autothrottle"
#load plugin "autosnoop"

# Control throttle/snoop with nsctl
#load plugin "throttlectl"
#load plugin "snoopctl"

# Punt RX speed if not supplied
#load plugin "setrxspeed"

# Remove domain from username
#load plugin "stripdomain"

# Walled garden
#load plugin "garden"