Practical VPNs

Practical VPNs Implementing Full-scale VPNs Liran Tal

liran@enginx.com

Yakov Shtutz Special thanks Shahar Fermon Testing and feedback This document was compiled from the administrator's point of view, to explain what are VPNs, how they are deployed today and to detail the necessary steps and tools to achieve and create a fully working VPN solution, integrated with RADIUS systems for AAA. I will not dwell in this document on how to compile source packages or kernel patching, and with the same tone I'm assuming the reader is an exprerienced Linux user. VPNs have their share amount of gossip for being a very complex thing, and in some cases this may be true as they tend to be more security intenssive which require adding more and more layers to the scheme. With this said, we'll take a look at how fairly straight-forward it is to setup VPNs and maintain them with varius Open-Source tools. Overview of VPNs and IPsec Virtual Private Networks The purpose of a VPN is to create a secure channel ontop of an un-secure medium, where a computer or a device are put in each end-point in order to establish communication, each of these end-points are often reffered to as Point of Presense, or POP. This kind of a communication allows the capability of creating a Virtual Private Network, which is accesable over a medium such as the Internet and thus, extend the physical boundaries of an existing local network. VPNs have three forms: Site-To-Site VPNs these setups exist in order to extend the local network to create a much bigger LAN over the Internet. Network-To-Host or Remote access VPNs where a central VPN server is able to achieve multiple connections, often reffered to as RoadWarrior VPNs. (This setup is very common among ISPs) Network-To-Network extranet VPNs allow secure connections within branches and business partners, they are an extension of a Site-To-Site VPNs. shows a Site-To-Site VPN diagram.

Site to Site VPN IP/VPNs are connections which are based upon IP tunnels. A tunnel is a way to encapsulate an IP packet inside another IP packet or some other type of packet. Why do we need tunneling? A Virtual Private Network is identified by IANA's private IP assignments and so such packet can not go beyond the uplink Internet interface. shows the tunneling process.

Tunneling Process Several tunneling protocols are available for manifesting VPNs. L2F Layer 2 Forwarding, an older implementation which assume position at the link layer of the OSI. It has no encryption capabilities and hence, deprecated. L2TP Layer 2 Tunneling Protocol, still no encryption capabilities. PPTP Point-to-Point Tunneling Protocol, and yet again, no encryption. As seen, the requirement of encryption enhancement is urgent in order to assure authentication, data integrity and privacy. IPsec solves this by providing a suite of security measures implemented at layer 3. IP Security Suite (IPsec) VPN Security is now appearing, this complex things. How so? VPN tunnels by themselves are easily maintained by single-standalone tools like pppd, l2tpns, stunnel and others. Involving security with VPNs though requires more: authentication, data integrity and privacy keying management Keys are secrets being shared by two end-points to provide a secure mean of communication against a third-party connection from sniffing the actual data. Different ways to handle key management include RADIUS (Remote Authentication Dial In User Service) systems which provide AAA (Authentication, Authorization and Accounting). Another solution is ISAKMP/Oackly - Internet Security Association and Key Management Protocol. This solution requires you to posess one of the following: something you have something you know something you are The more requirements you meet the more secure is the medium, once established. Let's review, something we have is like a certificate, it proves who we are. Something we know, is a key, a secret password which we were told in a whisper, and something we are is our-fingerprint which identifies ourselves from other individuals. IPsec in Depth IPsec consists of two main protocols, an Authentication Header and Encapsulation Security Payload, also known as AH and ESP. Although it is not bound to these and can be extended (and often is) to other standarts such as Data Encryption Standart (DES and 3DES) Diffie-Hellman (DH) Secure Hash Algorithm-1 (SHA1) Message Digest 5 (MD5) Internet Key Exchange (IKE) Certification Authorities (CA) We'll be deploying an IKE daemon to handle the key management, which uses the Diffie- Hellman cryptography protocol in order to allow two parties to establish a connection based upon a shared secret key that both parties posess. (Authentication within IKE is handled by MD5 hashing) IKE is responsible for authentication of two IPsec parties, negotiation of keys for encryption algorithms and security associations. This process is commonly regarded as two phases: Phase 1: IKE Security Association The IKE daemon authenticates against the peers in order to achieve a secure channel, according to the Diffie-Hellman key agreement. Phase 2: IKE IPsec Negotiation After achieving an authenticated channel, the parties now negotiate a secure transform (the way to encrypt and secure the medium) where the sender is offering his/hers transform set after which the receiver decides upon one. An IPsec session can now safely begin. Just to be clear, a Security Association is an agreed relation between two parties which describes how they will use security services (from IPsec) to communicate. IPsec Modes IPsec can operate in two different modes: Transport mode takes place when two devices (like a station and a gateway (now considered a host)) are establishing a connection which upon they both support IPsec. Tunnel mode we require tunnel mode when we proxy IPsec connetions between two stations behind the IPsec gateway. For example, in a Site-to-Site VPN a tunnel mode lives, since it exists in order to provide the stations behind these gateways runing the VPN/IPsec to communicate securely. In this situation, both end-points are runing an IPsec software. In definition, a tunnel mode IPsec is better secured than transport. Without going too deep into the ins-and-outs of the technical side, transport mode doesn't encapsulate the actual IP layer but only the tcp/udp (Transport layer of the OSI) where-as a tunnel mode encapsulate both the Transport layer and the IP layer into a new IP packet. To summarize, we need VPNs for data-exchange methods and a set of IPsec tools for security reasons. VPN Deployment I've assembled another diagram to view the actual VPN setup. gives a general description of how the network will be layed out in real-world scenario.

VPN Deployment We notice that a single Linux box is acting as a Gateway and has all the services included with it. This is a bad idea from a security prespective but it's easy to just deploy the FreeRADIUS and MySQL servers on another machine. Of course the L2TPns and the rest of the IPsec tools suite would have to remain on the Gateway box (not necessarily the Firewall). attempts to explain the actual process that the VPN takes and to detail the place that each of that application-in-charge takes place.

VPN Process Requirements The Toolbox Following is a description of the requirements you will have to meet: A Linux box preferably a 2.4.27 kernel or higher. Debian is the chosen distribution which means we'll be using apt-get for installation, but I'll also focus on basic source tarballs installation. Dependencies: ipsec configuration in the kernel L2TPns an L2TP PPP Termination tool. Dependencies: libcli 1.8.0 or greater tun/tap interface compiled in the kernel or as a module FreeRADIUS For authentication, and accounting. MySQL To act as a back-end database for the RADIUS. OpenSwan Provides the ipsec suite package. Kernel Support Debian stock kernel 2.4.27 and up are ipsec compatible although if you think otherwise check for the kernel-patch-openswan package. Installation L2TPns Installation

L2TPns is a layer 2 tunneling protocol network server (LNS). It supports up to 65535 concurrent sessions per server/cluster plus ISP features such as rate limiting, walled garden, usage accounting, and more.

In a personal note - L2TPns is highly configurable for many cases, and extremely reliable for production/commerical use. Step 1: Make sure you have libcli-1.8 development package installed: # apt-cache search libcli libcli-dev - emulates a cisco style telnet command-line interface (dev files) libcli1 - emulates a cisco style telnet command-line interface # apt-get install libcli-dev Step 2: Download the source from SourceForge. Step 3: Build and install: make && make install Alternately, you can skip these steps and simply apt-get install l2tpns. On RPM-based distributions, you should be able to make packages from the libcli and l2tpns source tarballs with rpmbuild -ta. Once compiliation is done you will have l2tpns in /usr/sbin/l2tpns, and all configuration files can be found in /etc/l2tpns/. Configuration The only configuration that L2TPns takes is centralized in the configuration file /etc/l2tpns/startup-config. set debug 2 # Debugging level set log_file "/var/log/l2tpns" # Log file: comment out to use stderr, use # "syslog:facility" for syslog set pid_file "/var/run/l2tpns.pid" # Write pid to this file set l2tp_secret "secret" # shared secret set primary_dns 212.117.128.6 # Only 2 DNS server entries are allowed set secondary_dns 212.117.129.3 set primary_radius 192.168.0.1 # Can have multiple radius server entries, # but ony one radius secret set primary_radius_port 1812 set radius_secret "radius_secret" set radius_accounting yes set radius_dae_port 3799 set accounting_dir "/var/run/l2tpns/acct" # Write usage accounting files into specified # directory set peer_address 192.168.0.1 # Gateway address given to clients load plugin "sessionctl" # Drop/kill sessions load plugin "autothrottle" # Throttle/snoop based on RADIUS load plugin "throttlectl" # Control throttle/snoop with nsctl load plugin "snoopctl" This is the trimmed down version of probably most of the common configuration and even some extra options. Important configuration options are highlited and you should adjust these to meet your network needs. We can deploy all of the environment into one box which is of course not a very good idea from a security point of view, but will function just fine. Moreover, we will be using aliased IP addresses so once you've decided to move the FreeRADIUS daemon to another computer on the LAN it will be fairly easy and won't take too much configuration into it. Next, we need to setup the IP pool that L2TPns will provide to each VPN client. The configuration file is located at /etc/l2tpns/ip_pool and should look like the following: 172.16.21.0/24 Of course you can change this pool to anything else (IANA IPs assigned for private internets only) just make sure it is not conflicting with your current LAN network addresses. This means that if you've assigned addresses of 192.168.0.1 and 192.168.0.2 to your LAN boxes you can't have a pool of 192.168.0.1/24 defined since L2TPns will try to route those addresses from the tun device, which is needless to say a bad idea... Next up, creating the access-list for L2TPns. Add a username and password into /etc/l2tpns/users: admin:12345 The password may either be plain-text as above, or encrypted with MD5 or DES (to distinguish DES from plain-text passwords, prefix the value with {crypt}). L2TPns utilizes a terminal connection on port 23 which you would feel very comfortable in if you have worked with routers and switches devices before. The terminal provides control over the ppp termination which is why we've created an account to log on to. IPsec Installation User-space IPsec tools for various IPsec implementations exist for linux, among them is the port of KAME's libipsec, setkey, and racoon. Others are the OpenSWAN (a successor to the FreeSWAN project). Getting IPsec installed is fairly easy with Debian: # apt-get install openswan The OpenSWAN project provides packages for RPM-based distributions. Alternately, you may download the source from the OpenSWAN project: # tar xvzf openswan-2.4.4.tar.gz # cd openswan-2.4.4 # ./configure && make && make install Configuration OpenSWAN acts as the IKE daemon (remember IKE? it's job is to authenticate between the two peers and negotiate a secure medium). We will be setting up the IKE daemon as a RoadWarrior configuration, a term for remote access VPNs. We desire this approach for compatibilty because after our VPN solution will be complete any user from a Windows machine will be easily ready to connect without any 3rd party applications, same for Linux. Configuration files are placed in /etc/ipsec.d/, /etc/ipsec.conf and /etc/ipsec.secrets. Let's start by choosing the remote client and it's PSK (Private Shared Key) /etc/ipsec.secrets: hostname_or_ipaddress %any : PSK "mysecretkeyisverylong" This is an IP/key pair. The IP or FQDN defines the local peer (like a SOHO branch), then the remote host. Here we defined %any for all hosts, though it's possible to define only a specific IP. At last, we define the key associated with it. A better way to create a key is to utilize /dev/random for creating a unique key. # dd if=/dev/random count=16 bs=1 2>/dev/null | xxd -ps Next, let's prepare the configuration file /etc/ipsec.conf: version 2.0 config setup nat_traversal=yes conn l2tp authby=secret pfs=no keyingtries=3 left=real_ip_address leftnexthop=%defaultroute leftprotoport=17/%any right=%any rightprotoport=17/%any auto=add include /etc/ipsec.d/examples/no_oe.conf In this file we have first defined version 2 which is a must, then enabled NAT Traversal. To understand the importance of this feature think of the following scenario: A remote user attempts to connect while he's behind a router and therefore NATed. The router has to de-encapsulate the packet, change things and then build it up again and send it. IPsec doesn't like other people messing with it's packet. That's why we solve this issue with NAT Traversal. Next up we configure authentication type (certificates, psk, rsa keys, etc) then the left and right peers. The default mode OpenSWAN takes is tunnel unless told otherwise. I won't go into in-depth explanation of every method, you can take a quick look at /etc/ipsec.d/examples for more explanation and other variations of working with RSA keys, Certificates, host-to-host, and more. In summary: We've configured an almost complete IPsec VPN setup. We've installed and configured a VPN server (L2TPns) and our IPsec security suite. To control both of them we use: /etc/init.d/l2tpns and /etc/init.d/racoon (location of start-up scripts may vary on non-Debian systems, or if you've installed from source). FreeRADIUS The VPN setup needs to authenticate against something, that is the users database which we chose to be a FreeRADIUS server backed with a MySQL database. Installation

FreeRADIUS is the premiere open source RADIUS server. While detailed statistics are not available, we believe that FreeRADIUS is well within the top 5 RADIUS servers world-wide, in terms of the number of people who use it daily for authentication. It scales from embedded systems with small amounts of memory, to systems with millions of users. It is fast, flexible, configurable, and supports more authentication protocols than many commercial servers.

Installing on Debian: # apt-get install freeradius freeradius-mysql From source: Download the latest freeradius package from freeradius.org # tar xvzf freeradius.tar.gz # cd freeradius # ./configure && make && make install Configuration This will appear a bit complex but it isn't, it's just a lot of configuration. Following are the configurations you need to have in your /etc/freeradius/ files. In this section I will not give you a dump of the configuration since they are very long and mostly default. I'll just post which changes to make. We haven't yet configured MySQL, but it'll come afterwards, don't worry. Make the following changes to the file /etc/freeradius/sql.conf: server = "192.168.0.1" login = "radius" password = "12345678" Add the following to the file /etc/freeradius/clients.conf: client 192.168.0.1 { secret = my_secret shortname = localhost nastype = other } Don't confuse the secret directive there with IPsec. RADIUS server are using secret keys also to identify their allowed NAS (Network Access Servers), these are the clients that talk to the RADIUS server. Also, change the client 127.0.0.1 {} directive to hold the secret "my_secret" like we configured for 192.168.0.1 to avoid conflicts. Uncomment the sql directive in the authorize, accounting, and session sections of /etc/freeradius/radiusd.conf. Now for populating FreeRADIUS with MySQL. If you don't know or haven't set root password for MySQL you can do it now with: # mysqladmin -u root password password_here Then add the following to /root/.my.cnf: [mysqladmin] user = root password = password_here Create the radius database, using the schema given in /usr/share/doc/freeradius/examples/db_mysql.sql.gz . It may be necessary to modify the column definition of id in the nas table, removing DEFAULT '0' such that the definition reads: id int(10) NOT NULL auto_increment, # mysqladmin create radius # mysql radius mysql> source db_mysql.sql mysql> GRANT ALL ON * TO 'radius'@'localhost' IDENTIFIED BY 'radius_password'; All the configuration is now done. Let's add a user to our VPN database. # mysql radius mysql> INSERT INTO radcheck values (0, "test", "User-Password", "==", "1234"); We have now created a user in the database of username test and password 1234. Testing the RADIUS setup is simple using the radtest utility provided with it. # radtest Usage: radtest user passwd radius-server[:port] nas-port-number secret [ppphint] [nasname] # radtest test 1234 192.168.0.1 1812 my_secret radtest sends an Access-Request to the RADIUS server and expects an Access-Accept back from it. If you're not getting an Access-Accept from the RADIUS you're advised to check the configuration again and see what you might have missed. Firewall Configuration We need to apply a few things to iptables configuration and kernel networking. First off, we need to accept VPN-specific packets through the firewall. Of course you will have to adjust the rules to fits you needs, in this case, ppp0 is the Internet interface. # iptables --append INPUT --in-interface ppp0 -p udp --dport 1701 -j ACCEPT # iptables --append INPUT --in-interface ppp0 -p udp --dport 500 -j ACCEPT # iptables --append INPUT --in-interface ppp0 -p udp --dport 4500 -j ACCEPT # iptables --append INPUT --in-interface ppp0 -p 50 -j ACCEPT If you haven't setup your Linux box as a gateway yet then you have to allow forwarding/masqing for the boxes on the LAN (and therefore for the VPN clients): # iptables --table nat --append POSTROUTING --out-interface ppp0 -j MASQUERADE # iptables --append FORWARD --in-interface eth0 -j ACCEPT # echo 1 > /proc/sys/net/ipv4/ip_forward References VPN Reference L2TPns Project OpenSWAN Project