X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/137bcc99810a8bfc97030eceee52a96c75e91987..0f20bfda6a2b5c756eeaa235b2eb48d4e4072bd0:/Docs/manual.html?ds=inline diff --git a/Docs/manual.html b/Docs/manual.html index 384fe9a..060c470 100644 --- a/Docs/manual.html +++ b/Docs/manual.html @@ -60,29 +60,17 @@ H3 {

Overview

-l2tpns a complete L2TP implementation. It supports the LAC, LNS and - PPPOE server.

+l2tpns a complete L2TP implementation. It supports the LAC, LNS, PPPOE and DHCPv6 server.

-L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 -protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns -implements PPP over L2TP only.

+L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns implements PPP over L2TP only.

-There are a couple of other L2TP implementations, of which l2tpd is probably the -most popular. l2tpd also will handle being either end of a tunnel, and -is a lot more configurable than l2tpns. However, due to the way it works, -it is nowhere near as scalable.

+There are a couple of other L2TP implementations, of which l2tpd is probably the most popular. l2tpd also will handle being either end of a tunnel, and is a lot more configurable than l2tpns. However, due to the way it works, it is nowhere near as scalable.

-l2tpns uses the TUN/TAP interface provided by the Linux kernel to receive -and send packets. Using some packet manipulation it doesn't require a -single interface per connection, as l2tpd does.

+l2tpns uses the TUN/TAP interface provided by the Linux kernel to receive and send packets. Using some packet manipulation it doesn't require a single interface per connection, as l2tpd does.

-This allows it to scale extremely well to very high loads and very high -numbers of connections.

+This allows it to scale extremely well to very high loads and very high numbers of connections.

-It also has a plugin architecture which allows custom code to be run -during processing. An example of this is in the walled garden module -included.

+It also has a plugin architecture which allows custom code to be run during processing. An example of this is in the walled garden module included.


Documentation is not my best skill. If you find any problems @@ -167,15 +155,15 @@ only ever be used for working out why it doesn't work at all.

  • log_file (string)
    -This will be where all logging and debugging information is written -to. This may be either a filename, such as /var/log/l2tpns, or -the special magic string syslog:facility, where facility -is any one of the syslog logging facilities, such as local5. +This will be where all logging and debugging information is written to. This may be either a filename, such as /var/log/l2tpns, or the special magic string syslog:facility, where facility is any one of the syslog logging facilities, such as local5.
  • pid_file (string)
    -If set, the process id will be written to the specified file. The -value must be an absolute path. +If set, the process id will be written to the specified file. The value must be an absolute path. +
    • + +
  • random_deviceB> (string)
    +Path to random data source (default /dev/urandom). Use "" to use the rand() library function.
  • l2tp_secret (string)
    @@ -185,8 +173,7 @@ used if the LAC requests authentication.
  • l2tp_mtu (int)
    -MTU of interface for L2TP traffic (default: 1500). Used to set link -MRU and adjust TCP MSS. +MTU of interface for L2TP traffic (default: 1500). Used to set link MRU and adjust TCP MSS.
  • ppp_restart_time (int)
    @@ -231,8 +218,7 @@ session is closed.
  • radius_secret (string)
    -This secret will be used in all RADIUS queries. If this is not set then -RADIUS queries will fail. +This secret will be used in all RADIUS queries. If this is not set then RADIUS queries will fail.
  • radius_authtypes (string)
    @@ -252,11 +238,7 @@ session is established.
  • bind_address (ip address)
    -It's the listen address of the l2tp udp protocol sent and received -to LAC. This address is also assigned to the tun interface if no -iftun_address is specified. Packets containing user traffic should be -routed via this address if given, otherwise the primary address of the -machine. +It's the listen address of the l2tp udp protocol sent and received to LAC. This address is also assigned to the tun interface if no iftun_address is specified. Packets containing user traffic should be routed via this address if given, otherwise the primary address of the machine.
  • iftun_address (ip address)
    @@ -280,7 +262,6 @@ for Address1 on LNS1 and a bgp.prepend(MY_AS) for Address2 on LNS2 example of use with 2 address:
    set bind_multi_address "64.14.13.41, 64.14.13.42" -
  • tundevicename (string)
    @@ -316,13 +297,13 @@ every connected use will be dumped to a file in this directory. Each file dumped begins with a header, where each line is prefixed by #. Following the header is a single line for every connected user, fields separated by a space.
    The fields are username, ip, qos, -uptxoctets, downrxoctets. The qos field is 1 if a standard user, and -2 if the user is throttled. +uptxoctets, downrxoctets, origin (optional). The qos field is 1 if a standard user, and +2 if the user is throttled. The origin field is dump if account_all_origin is set to true +(origin value: L=LAC data, R=Remote LNS data, P=PPPOE data).
    • -
  • setuid (int)
    -After starting up and binding the interface, change UID to this. This -doesn't work properly. +
  • account_all_origin (boolean)
    +If set to true, all origin of the usage is dumped to the accounting file (LAC+Remote LNS+PPPOE)(default false).
  • dump_speed (boolean)
    @@ -364,6 +345,11 @@ Multicast cluster address (default: 239.192.13.13). See the section on Clustering for more information.
    • +
  • cluster_port (int udp port)
    +UDP cluster port (default: 32792). See the section on +Clustering for more information. +
    • +
  • cluster_interface (string)
    Interface for cluster packets (default: eth0).
    • @@ -397,6 +383,12 @@ Drop sessions who have not responded within idle_echo_timeout seconds (default: 240 (seconds)) +
  • ppp_keepalive (int)
    +Change this value to no to force generation of LCP ECHO every +echo_timeout seconds, even there are activity on the link. +(default: yes) +
    • +
  • auth_tunnel_change_addr_src (boolean)
    This parameter authorize to change the source IP of the tunnels l2tp. This parameter can be used when the remotes BAS/LAC are l2tpns server @@ -466,6 +458,11 @@ PPPOE service name (default: NULL). PPPOE access concentrator name (default: "l2tpns-pppoe").
    • +
  • pppoe_only_equal_svc_name (boolean)
    +If set to yes, the PPPOE server only accepts clients with a "service-name" +different from NULL and a "service-name" equal to server "service-name" (default: no). +
    • +

    BGP configuration

    @@ -1158,6 +1155,13 @@ A master, when determining that it has at least one up-to-date slave will drop all routes (raising them again if all slaves disappear) and subsequently handle only packets forwarded to it by the slaves.

    +*Configurable with cluster_master_min_adv

    + +Multiple clusters can be run on the same network by just using different +multicast cluster_address. However, for a given host to be part +of multiple clusters without mixing the clusters, +cluster_port must be different for each cluster. +

    Routing

    If you are running a single instance, you may simply statically route the IP pools to the bind_address (l2tpns will send a gratuitous