X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/35f10d93f4f2bbd5791dc0996a36f0ba8386576d..a478f1c2a22514a4de4521ffe3ed93d3c2c427b8:/Docs/manual.html diff --git a/Docs/manual.html b/Docs/manual.html index d6930dd..384fe9a 100644 --- a/Docs/manual.html +++ b/Docs/manual.html @@ -60,8 +60,8 @@ H3 {

Overview

-l2tpns is half of a complete L2TP implementation. It supports only the -LNS side of the connection.

+l2tpns a complete L2TP implementation. It supports the LAC, LNS and + PPPOE server.

L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns @@ -265,6 +265,28 @@ from the address of "bind_address" (For use in cases of specific configuration). If no address is given to iftun_address and bind_address, 1.1.1.1 is used. +

  • bind_multi_address (ip address)
    +This parameter permit to listen several addresss of the l2tp udp protocol +(and set several address to the tun interface). +
    +WHEN this parameter is set, It OVERWRITE the parameters "bind_address" +and "iftun_address". +
    +these can be interesting when you want do load-balancing in cluster mode +of the uploaded from the LAC. For example you can set a bgp.prepend(MY_AS) +for Address1 on LNS1 and a bgp.prepend(MY_AS) for Address2 on LNS2 +(see BGP AS-path prepending). +
    +example of use with 2 address: +
    +set bind_multi_address "64.14.13.41, 64.14.13.42" + +
    • + +
  • tundevicename (string)
    +Name of the tun interface (default: "tun0"). +
    • +
  • peer_address (ip address)
    Address to send to clients as the default gateway.
    • @@ -375,6 +397,24 @@ Drop sessions who have not responded within idle_echo_timeout seconds (default: 240 (seconds)) +
  • auth_tunnel_change_addr_src (boolean)
    +This parameter authorize to change the source IP of the tunnels l2tp. +This parameter can be used when the remotes BAS/LAC are l2tpns server +configured in cluster mode, but that the interface to remote LNS are +not clustered (the tunnel can be coming from different source IP) +(default: no). +
    • + +
  • disable_sending_hello (boolean)
    +Disable l2tp sending HELLO message for Apple compatibility. +Some OS X implementation of l2tp no manage the L2TP "HELLO message". +(default: no). +
    • + + + +

    LAC configuration

    + -

    The REMOTES LNS configuration is entered by the command: +

    A static REMOTES LNS configuration can be entered by the command:

    setforward MASK IP PORT SECRET
    where MASK specifies the mask of users who have forwarded to -remote LNS (ex: /myISP@company.com).
    -where IP specifies the IP of the remote LNS (ex: 66.66.66.55).
    +remote LNS (ex: "/friendISP@company.com").
    +where IP specifies the IP of the remote LNS (ex: "66.66.66.55").
    where PORT specifies the L2TP Port of the remote LNS (Normally should be 1701) (ex: 1701).
    where SECRET specifies the secret password the remote LNS (ex: mysecret).
    +
    +The static Remote LNS configuration can be used when the friend ISP not +have a proxied Radius.
    +If the proxied Radius is used, It will return the RADIUS attributes:
    + Tunnel-Type: 1 = L2TP
    + Tunnel-Medium-Type: 1 = IPv4
    + Tunnel-Password: 1 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 1 = "88.xx.xx.x1"
    + Tunnel-Assignment-Id: 1 = "friendisp_lns1"
    + Tunnel-Type: 2 = L2TP
    + Tunnel-Medium-Type: 2 = IPv4
    + Tunnel-Password: 2 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 2 = "88.xx.xx.x2"
    + Tunnel-Assignment-Id: 2 = "friendisp_lns2"
    + +

    PPPOE configuration

    + + + +

    BGP configuration

    BGP routing configuration is entered by the command: The routing configuration section is entered by the command