X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/4f253feef08f01c03bc63f70f9de3937541ccd79..e57e8c3825df6800ace741a7798ca96c6e9a577e:/Docs/startup-config.5?ds=inline

diff --git a/Docs/startup-config.5 b/Docs/startup-config.5
index c9c6f81..6c2cf28 100644
--- a/Docs/startup-config.5
+++ b/Docs/startup-config.5
@@ -2,7 +2,7 @@
 .de Id
 .ds Dt \\$4 \\$5
 ..
-.Id $Id: startup-config.5,v 1.11 2005/06/28 14:48:31 bodea Exp $
+.Id $Id: startup-config.5,v 1.18 2006/07/01 12:40:17 bodea Exp $
 .TH STARTUP-CONFIG 5 "\*(Dt" L2TPNS "File Formats and Conventions"
 .SH NAME
 startup\-config \- configuration file for l2tpns
@@ -63,17 +63,31 @@ for authenticating tunnel request.  Must be the same as the LAC, or
 authentication will fail.  Only actually be used if the LAC requests
 authentication.
 .TP
-.BR primary_dns , " secondary_dns"
+.B l2tp_mtu
+MTU of interface for L2TP traffic (default: 1500).  Used to set link
+MRU and adjust TCP MSS.
+.TP
+.B ppp_restart_time
+Restart timer for PPP protocol negotiation in seconds (default: 3).
+.TP
+.B ppp_max_configure
+Number of configure requests to send before giving up (default: 10).
+.TP
+.B ppp_max_failure
+Number of Configure-Nak requests to send before sending a
+Configure-Reject (default: 5).
+.TP
+.BR primary_dns ", " secondary_dns
 Whenever a PPP connection is established, DNS servers will be sent to the
 user, both a primary and a secondary.  If either is set to 0.0.0.0, then that
 one will not be sent.
 .TP
-.BR primary_radius , " secondary_radius"
+.BR primary_radius ", " secondary_radius
 Sets the RADIUS servers used for both authentication and accounting. 
 If the primary server does not respond, then the secondary RADIUS
 server will be tried.
 .TP
-.BR primary_radius_port , " secondary_radius_port"
+.BR primary_radius_port ", " secondary_radius_port
 Sets the authentication ports for the primary and secondary RADIUS
 servers.  The accounting port is one more than the authentication
 port.  If no ports are given, authentication defaults to 1645, and
@@ -104,11 +118,19 @@ A comma separated list of supported RADIUS authentication methods
 Port for DAE RADIUS (Packet of Death/Disconnect, Change of Authorization)
 requests (default: 3799).
 .TP
+.BR radius_bind_min ", " radius_bind_max
+Define a port range in which to bind sockets used to send and receive
+RADIUS packets.  Must be at least RADIUS_FDS (64) wide.  Simplifies
+firewalling of RADIUS ports (default: dynamically assigned).
+.TP
 .B allow_duplicate_users
 Allow multiple logins with the same username.  If false (the default),
 any prior session with the same username will be dropped when a new
 session is established.
 .TP
+.B guest_account
+Allow multiple logins matching this specific username.
+.TP
 .B bind_address
 When the tun interface is created, it is assigned the address
 specified here.  If no address is given, 1.1.1.1 is used.  Packets
@@ -135,10 +157,6 @@ session requires two buckets (in and out).
 If set to a directory, then every 5 minutes the current usage for
 every connected use will be dumped to a file in this directory.
 .TP
-.B setuid
-After starting up and binding the interface, change UID to this.  This
-doesn't work properly.
-.TP
 .B dump_speed
 If set to true, then the current bandwidth utilization will be logged
 every second.  Even if this is disabled, you can see this information
@@ -184,6 +202,9 @@ Multicast cluster address (default: 239.192.13.13).
 .B cluster_interface
 Interface for cluster packets (default: eth0).
 .TP
+.B cluster_mcast_ttl
+TTL for multicast packets (default: 1).
+.TP
 .B cluster_hb_interval
 Interval in tenths of a second between cluster heartbeat/pings.
 .TP