X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/c826a9e4b3a9bf20c55ffc723fa5337147e7a557..658f6aea7b968c7db3a1c2be58c62efb091c3984:/Docs/manual.html?ds=inline diff --git a/Docs/manual.html b/Docs/manual.html index 5c830f2..384fe9a 100644 --- a/Docs/manual.html +++ b/Docs/manual.html @@ -60,8 +60,8 @@ H3 {

Overview

-l2tpns is half of a complete L2TP implementation. It supports only the -LNS side of the connection.

+l2tpns a complete L2TP implementation. It supports the LAC, LNS and + PPPOE server.

L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns @@ -252,15 +252,44 @@ session is established.

  • bind_address (ip address)
    -When the tun interface is created, it is assigned the address -specified here. If no address is given, 1.1.1.1 is used. Packets -containing user traffic should be routed via this address if given, -otherwise the primary address of the machine. +It's the listen address of the l2tp udp protocol sent and received +to LAC. This address is also assigned to the tun interface if no +iftun_address is specified. Packets containing user traffic should be +routed via this address if given, otherwise the primary address of the +machine. +
    • + +
  • iftun_address (ip address)
    +This parameter is used when you want a tun interface address different +from the address of "bind_address" (For use in cases of specific configuration). +If no address is given to iftun_address and bind_address, 1.1.1.1 is used. +
    • + +
  • bind_multi_address (ip address)
    +This parameter permit to listen several addresss of the l2tp udp protocol +(and set several address to the tun interface). +
    +WHEN this parameter is set, It OVERWRITE the parameters "bind_address" +and "iftun_address". +
    +these can be interesting when you want do load-balancing in cluster mode +of the uploaded from the LAC. For example you can set a bgp.prepend(MY_AS) +for Address1 on LNS1 and a bgp.prepend(MY_AS) for Address2 on LNS2 +(see BGP AS-path prepending). +
    +example of use with 2 address: +
    +set bind_multi_address "64.14.13.41, 64.14.13.42" + +
    • + +
  • tundevicename (string)
    +Name of the tun interface (default: "tun0").
  • peer_address (ip address)
    Address to send to clients as the default gateway. - +
  • send_garp (boolean)
    Determines whether or not to send a gratuitous ARP for the @@ -357,8 +386,90 @@ from the master. Determines the minumum number of up to date slaves required before the master will drop routes (default: 1).
    • + +
  • echo_timeout (int)
    +Time between last packet sent and LCP ECHO generation +(default: 10 (seconds)). +
    • + +
  • idle_echo_timeout (int)
    +Drop sessions who have not responded within idle_echo_timeout seconds +(default: 240 (seconds)) +
    • + +
  • auth_tunnel_change_addr_src (boolean)
    +This parameter authorize to change the source IP of the tunnels l2tp. +This parameter can be used when the remotes BAS/LAC are l2tpns server +configured in cluster mode, but that the interface to remote LNS are +not clustered (the tunnel can be coming from different source IP) +(default: no). +
    • + +
  • disable_sending_hello (boolean)
    +Disable l2tp sending HELLO message for Apple compatibility. +Some OS X implementation of l2tp no manage the L2TP "HELLO message". +(default: no). +
    • + + + +

    LAC configuration

    + +

    A static REMOTES LNS configuration can be entered by the command:

    +
    setforward MASK IP PORT SECRET
    + +where MASK specifies the mask of users who have forwarded to +remote LNS (ex: "/friendISP@company.com").
    +where IP specifies the IP of the remote LNS (ex: "66.66.66.55").
    +where PORT specifies the L2TP Port of the remote LNS +(Normally should be 1701) (ex: 1701).
    +where SECRET specifies the secret password the remote LNS (ex: mysecret).
    +
    +The static Remote LNS configuration can be used when the friend ISP not +have a proxied Radius.
    +If the proxied Radius is used, It will return the RADIUS attributes:
    + Tunnel-Type: 1 = L2TP
    + Tunnel-Medium-Type: 1 = IPv4
    + Tunnel-Password: 1 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 1 = "88.xx.xx.x1"
    + Tunnel-Assignment-Id: 1 = "friendisp_lns1"
    + Tunnel-Type: 2 = L2TP
    + Tunnel-Medium-Type: 2 = IPv4
    + Tunnel-Password: 2 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 2 = "88.xx.xx.x2"
    + Tunnel-Assignment-Id: 2 = "friendisp_lns2"
    + +

    PPPOE configuration

    + + + +

    BGP configuration

    +

    BGP routing configuration is entered by the command: The routing configuration section is entered by the command

    router bgp as