X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/ddffeb1ceb781cfb17ca83e846de835ffd4bda54..2a385573a65683c450a53fa6a558a8132327ccf4:/Docs/manual.html diff --git a/Docs/manual.html b/Docs/manual.html index 4215189..1c59720 100644 --- a/Docs/manual.html +++ b/Docs/manual.html @@ -60,29 +60,17 @@ H3 {

Overview

-l2tpns is half of a complete L2TP implementation. It supports only the -LNS side of the connection.

+l2tpns a complete L2TP implementation. It supports the LAC, LNS, PPPOE and DHCPv6 server.

-L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 -protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns -implements PPP over L2TP only.

+L2TP (Layer 2 Tunneling Protocol) is designed to allow any layer 2 protocol (e.g. Ethernet, PPP) to be tunneled over an IP connection. l2tpns implements PPP over L2TP only.

-There are a couple of other L2TP implementations, of which l2tpd is probably the -most popular. l2tpd also will handle being either end of a tunnel, and -is a lot more configurable than l2tpns. However, due to the way it works, -it is nowhere near as scalable.

+There are a couple of other L2TP implementations, of which l2tpd is probably the most popular. l2tpd also will handle being either end of a tunnel, and is a lot more configurable than l2tpns. However, due to the way it works, it is nowhere near as scalable.

-l2tpns uses the TUN/TAP interface provided by the Linux kernel to receive -and send packets. Using some packet manipulation it doesn't require a -single interface per connection, as l2tpd does.

+l2tpns uses the TUN/TAP interface provided by the Linux kernel to receive and send packets. Using some packet manipulation it doesn't require a single interface per connection, as l2tpd does.

-This allows it to scale extremely well to very high loads and very high -numbers of connections.

+This allows it to scale extremely well to very high loads and very high numbers of connections.

-It also has a plugin architecture which allows custom code to be run -during processing. An example of this is in the walled garden module -included.

+It also has a plugin architecture which allows custom code to be run during processing. An example of this is in the walled garden module included.


Documentation is not my best skill. If you find any problems @@ -167,15 +155,15 @@ only ever be used for working out why it doesn't work at all.

  • log_file (string)
    -This will be where all logging and debugging information is written -to. This may be either a filename, such as /var/log/l2tpns, or -the special magic string syslog:facility, where facility -is any one of the syslog logging facilities, such as local5. +This will be where all logging and debugging information is written to. This may be either a filename, such as /var/log/l2tpns, or the special magic string syslog:facility, where facility is any one of the syslog logging facilities, such as local5.
  • pid_file (string)
    -If set, the process id will be written to the specified file. The -value must be an absolute path. +If set, the process id will be written to the specified file. The value must be an absolute path. +
    • + +
  • random_deviceB> (string)
    +Path to random data source (default /dev/urandom). Use "" to use the rand() library function.
  • l2tp_secret (string)
    @@ -185,8 +173,7 @@ used if the LAC requests authentication.
  • l2tp_mtu (int)
    -MTU of interface for L2TP traffic (default: 1500). Used to set link -MRU and adjust TCP MSS. +MTU of interface for L2TP traffic (default: 1500). Used to set link MRU and adjust TCP MSS.
  • ppp_restart_time (int)
    @@ -231,8 +218,7 @@ session is closed.
  • radius_secret (string)
    -This secret will be used in all RADIUS queries. If this is not set then -RADIUS queries will fail. +This secret will be used in all RADIUS queries. If this is not set then RADIUS queries will fail.
  • radius_authtypes (string)
    @@ -252,11 +238,7 @@ session is established.
  • bind_address (ip address)
    -It's the listen address of the l2tp udp protocol sent and received -to LAC. This address is also assigned to the tun interface if no -iftun_address is specified. Packets containing user traffic should be -routed via this address if given, otherwise the primary address of the -machine. +It's the listen address of the l2tp udp protocol sent and received to LAC. This address is also assigned to the tun interface if no iftun_address is specified. Packets containing user traffic should be routed via this address if given, otherwise the primary address of the machine.
  • iftun_address (ip address)
    @@ -265,6 +247,23 @@ from the address of "bind_address" (For use in cases of specific configuration). If no address is given to iftun_address and bind_address, 1.1.1.1 is used.
    • +
  • bind_multi_address (ip address)
    +This parameter permit to listen several addresss of the l2tp udp protocol +(and set several address to the tun interface). +
    +WHEN this parameter is set, It OVERWRITE the parameters "bind_address" +and "iftun_address". +
    +these can be interesting when you want do load-balancing in cluster mode +of the uploaded from the LAC. For example you can set a bgp.prepend(MY_AS) +for Address1 on LNS1 and a bgp.prepend(MY_AS) for Address2 on LNS2 +(see BGP AS-path prepending). +
    +example of use with 2 address: +
    +set bind_multi_address "64.14.13.41, 64.14.13.42" +
    • +
  • tundevicename (string)
    Name of the tun interface (default: "tun0").
    • @@ -298,13 +297,13 @@ every connected use will be dumped to a file in this directory. Each file dumped begins with a header, where each line is prefixed by #. Following the header is a single line for every connected user, fields separated by a space.
    The fields are username, ip, qos, -uptxoctets, downrxoctets. The qos field is 1 if a standard user, and -2 if the user is throttled. +uptxoctets, downrxoctets, origin (optional). The qos field is 1 if a standard user, and +2 if the user is throttled. The origin field is dump if account_all_origin is set to true +(origin value: L=LAC data, R=Remote LNS data, P=PPPOE data). -
  • setuid (int)
    -After starting up and binding the interface, change UID to this. This -doesn't work properly. +
  • account_all_origin (boolean)
    +If set to true, all origin of the usage is dumped to the accounting file (LAC+Remote LNS+PPPOE)(default false).
  • dump_speed (boolean)
    @@ -379,6 +378,24 @@ Drop sessions who have not responded within idle_echo_timeout seconds (default: 240 (seconds))
    • +
  • auth_tunnel_change_addr_src (boolean)
    +This parameter authorize to change the source IP of the tunnels l2tp. +This parameter can be used when the remotes BAS/LAC are l2tpns server +configured in cluster mode, but that the interface to remote LNS are +not clustered (the tunnel can be coming from different source IP) +(default: no). +
    • + +
  • disable_sending_hello (boolean)
    +Disable l2tp sending HELLO message for Apple compatibility. +Some OS X implementation of l2tp no manage the L2TP "HELLO message". +(default: no). +
    • + + + +

    LAC configuration

    + -

    The REMOTES LNS configuration is entered by the command: +

    A static REMOTES LNS configuration can be entered by the command:

    setforward MASK IP PORT SECRET
    where MASK specifies the mask of users who have forwarded to -remote LNS (ex: /myISP@company.com).
    -where IP specifies the IP of the remote LNS (ex: 66.66.66.55).
    +remote LNS (ex: "/friendISP@company.com").
    +where IP specifies the IP of the remote LNS (ex: "66.66.66.55").
    where PORT specifies the L2TP Port of the remote LNS (Normally should be 1701) (ex: 1701).
    where SECRET specifies the secret password the remote LNS (ex: mysecret).
    +
    +The static Remote LNS configuration can be used when the friend ISP not +have a proxied Radius.
    +If the proxied Radius is used, It will return the RADIUS attributes:
    + Tunnel-Type: 1 = L2TP
    + Tunnel-Medium-Type: 1 = IPv4
    + Tunnel-Password: 1 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 1 = "88.xx.xx.x1"
    + Tunnel-Assignment-Id: 1 = "friendisp_lns1"
    + Tunnel-Type: 2 = L2TP
    + Tunnel-Medium-Type: 2 = IPv4
    + Tunnel-Password: 2 = "LESECRETL2TP"
    + Tunnel-Server-Endpoint: 2 = "88.xx.xx.x2"
    + Tunnel-Assignment-Id: 2 = "friendisp_lns2"
    + +

    PPPOE configuration

    + + + +

    BGP configuration

    BGP routing configuration is entered by the command: The routing configuration section is entered by the command