X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/eb6906a28c887872d459890ad05cbf8e07c97b75..93151dffc9a84bfce42e7188f43a8eb0b3df6ff7:/Docs/startup-config.5

diff --git a/Docs/startup-config.5 b/Docs/startup-config.5
index fbc33ba..0d66608 100644
--- a/Docs/startup-config.5
+++ b/Docs/startup-config.5
@@ -2,7 +2,7 @@
 .de Id
 .ds Dt \\$4 \\$5
 ..
-.Id $Id: startup-config.5,v 1.1 2004-11-17 15:08:19 bodea Exp $
+.Id $Id: startup-config.5,v 1.5 2005-02-09 00:16:21 bodea Exp $
 .TH STARTUP-CONFIG 5 "\*(Dt" L2TPNS "File Formats and Conventions"
 .SH NAME
 startup\-config \- configuration file for l2tpns
@@ -63,14 +63,6 @@ Whenever a PPP connection is established, DNS servers will be sent to the
 user, both a primary and a secondary.  If either is set to 0.0.0.0, then that
 one will not be sent.
 .TP
-.B save_state
-When
-.B l2tpns
-receives a STGTERM it will write out its current ip_address_pool,
-session and tunnel tables to disk prior to exiting to be re-loaded at
-startup.  The validity of this data is obviously quite short and the
-intent is to allow an sessions to be retained over a software upgrade.
-.TP
 .BR primary_radius , " secondary_radius"
 Sets the RADIUS servers used for both authentication and accounting. 
 If the primary server does not respond, then the secondary RADIUS
@@ -160,6 +152,12 @@ process in memory.
 .B icmp_rate
 Maximum number of host unreachable ICMP packets to send per second.
 .TP
+.B packet_limit
+Maximum number of packets of downstream traffic to be handled each
+tenth of a second per session.  If zero, no limit is applied (default: 
+0).  Intended as a DoS prevention mechanism and not a general
+throttling control (packets are dropped, not queued).
+.TP
 .B cluster_address
 Multicast cluster address (default: 239.192.13.13).
 .TP
@@ -199,5 +197,121 @@ is the remote AS number and
 .IR keepalive ,
 .I hold
 are the timer values in seconds.
+.SS NAMED ACCESS LISTS
+Named access lists may be defined with either of
+.IP
+.BI "ip access\-list standard " name
+.br
+.BI "ip access\-list extended " name
+.PP
+Subsequent lines starting with
+.B permit
+or
+.B deny
+define the body of the access\-list.
+.PP
+.B Standard Access Lists
+.RS 4n
+Standard access lists are defined with:
+.IP
+.RB { permit | deny }
+.IR source " [" dest ]
+.PP
+Where
+.I source
+and
+.I dest
+specify IP matches using one of:
+.IP
+.I address
+.I wildard
+.br
+.B host
+.I address
+.br
+.B any
+.PP
+.I address
+and
+.I wildard
+are in dotted-quad notation, bits in the
+.I wildard
+indicate which address bits in
+.I address
+are relevant to the match (0 = exact match; 1 = don't care).
+.PP
+The shorthand
+.RB ' host
+.IR address '
+is equivalent to
+.RI ' address
+.BR 0.0.0.0 ';
+.RB ' any '
+to
+.RB ' 0.0.0.0
+.BR 255.255.255.255 '.
+.RE
+.PP
+.B Extended Access Lists
+.RS 4n
+Extended access lists are defined with:
+.IP
+.RB { permit | deny }
+.I proto
+.IR source " [" ports "] " dest " [" ports "] [" flags ]
+.PP
+Where
+.I proto
+is one of
+.BR ip ,
+.B tcp
+or
+.BR udp ,
+and
+.I source
+and
+.I dest
+are as described above for standard lists.
+.PP
+For TCP and UDP matches, source and destination may be optionally
+followed by a
+.I ports
+specification:
+.IP
+.RB { eq | neq | gt | lt }
+.I port
+.br
+.B
+range
+.I from to
+.PP
+.I flags
+may be one of:
+.RS
+.HP
+.RB { match\-any | match\-all }
+.RB { + | - }{ fin | syn | rst | psh | ack | urg }
+\&...
+.br
+Match packets with any or all of the tcp flags set
+.RB ( + )
+or clear
+.RB ( - ).
+.HP
+.B established
+.br
+Match "established" TCP connections:  packets with
+.B RST
+or
+.B ACK
+set, and
+.B SYN
+clear.
+.HP
+.B fragments
+.br
+Match IP fragments.  May not be specified on rules with layer 4
+matches.
+.RE
 .SH SEE ALSO
 .BR l2tpns (8)