X-Git-Url: http://git.sameswireless.fr/l2tpns.git/blobdiff_plain/f5071c422df06800e59bb1be0218c0f6ec2ba831..75ba8921cf932ef11ccac40e5f7bf9627f9697e0:/Docs/startup-config.5?ds=inline

diff --git a/Docs/startup-config.5 b/Docs/startup-config.5
index 35527f3..7b3655f 100644
--- a/Docs/startup-config.5
+++ b/Docs/startup-config.5
@@ -2,7 +2,7 @@
 .de Id
 .ds Dt \\$4 \\$5
 ..
-.Id $Id: startup-config.5,v 1.1 2004/11/17 15:08:19 bodea Exp $
+.Id $Id: startup-config.5,v 1.12 2005/07/31 10:04:14 bodea Exp $
 .TH STARTUP-CONFIG 5 "\*(Dt" L2TPNS "File Formats and Conventions"
 .SH NAME
 startup\-config \- configuration file for l2tpns
@@ -51,6 +51,11 @@ is any one of the syslog logging facilities, such as
 If set, the process id will be written to the specified file.  The
 value must be an absolute path.
 .TP
+.B random_device
+Path to random data source (default
+.BR /dev/urandom ).
+Use "" to use the rand() library function.
+.TP
 .B l2tp_secret
 The secret used by
 .B l2tpns
@@ -58,19 +63,21 @@ for authenticating tunnel request.  Must be the same as the LAC, or
 authentication will fail.  Only actually be used if the LAC requests
 authentication.
 .TP
+.B ppp_restart_time
+Restart timer for PPP protocol negotiation in seconds (default: 3).
+.TP
+.B ppp_max_configure
+Number of configure requests to send before giving up (default: 10).
+.TP
+.B ppp_max_failure
+Number of Configure-Nak requests to send before sending a
+Configure-Reject (default: 5).
+.TP
 .BR primary_dns , " secondary_dns"
 Whenever a PPP connection is established, DNS servers will be sent to the
 user, both a primary and a secondary.  If either is set to 0.0.0.0, then that
 one will not be sent.
 .TP
-.B save_state
-When
-.B l2tpns
-receives a STGTERM it will write out its current ip_address_pool,
-session and tunnel tables to disk prior to exiting to be re-loaded at
-startup.  The validity of this data is obviously quite short and the
-intent is to allow an sessions to be retained over a software upgrade.
-.TP
 .BR primary_radius , " secondary_radius"
 Sets the RADIUS servers used for both authentication and accounting. 
 If the primary server does not respond, then the secondary RADIUS
@@ -90,9 +97,28 @@ and a
 .B Stop
 record when the session is closed.
 .TP
+.B radius_interim
+If
+.B radius_accounting
+is on, defines the interval between sending of RADIUS interim
+accounting records (in seconds).
+.TP
 .B radius_secret
 Secret to be used in RADIUS packets.
 .TP
+.B radius_authtypes
+A comma separated list of supported RADIUS authentication methods
+("pap" or "chap"), in order of preference (default "pap").
+.TP
+.B radius_dae_port
+Port for DAE RADIUS (Packet of Death/Disconnect, Change of Authorization)
+requests (default: 3799).
+.TP
+.B allow_duplicate_users
+Allow multiple logins with the same username.  If false (the default),
+any prior session with the same username will be dropped when a new
+session is established.
+.TP
 .B bind_address
 When the tun interface is created, it is assigned the address
 specified here.  If no address is given, 1.1.1.1 is used.  Packets
@@ -105,7 +131,7 @@ Address to send to clients as the default gateway.
 .B send_garp
 Determines whether or not to send a gratuitous ARP for the
 .B bind_address
-when the server is ready to handle traffic (default:  true).  This
+when the server is ready to handle traffic (default: true).  This
 setting is ignored if BGP is configured.
 .TP
 .B throttle_speed
@@ -127,13 +153,9 @@ doesn't work properly.
 If set to true, then the current bandwidth utilization will be logged
 every second.  Even if this is disabled, you can see this information
 by running the
-.B
-uptime
+.B uptime
 command on the CLI.
 .TP
-.B cleanup_interval
-Interval between regular cleanups (in seconds).
-.TP
 .B multi_read_count
 Number of packets to read off each of the UDP and TUN fds when
 returned as readable by select (default: 10).  Avoids incurring the
@@ -160,6 +182,12 @@ process in memory.
 .B icmp_rate
 Maximum number of host unreachable ICMP packets to send per second.
 .TP
+.B packet_limit
+Maximum number of packets of downstream traffic to be handled each
+tenth of a second per session.  If zero, no limit is applied (default: 
+0).  Intended as a DoS prevention mechanism and not a general
+throttling control (packets are dropped, not queued).
+.TP
 .B cluster_address
 Multicast cluster address (default: 239.192.13.13).
 .TP
@@ -173,6 +201,15 @@ Interval in tenths of a second between cluster heartbeat/pings.
 Cluster heartbeat timeout in tenths of a second.  A new master will be
 elected when this interval has been passed without seeing a heartbeat
 from the master.
+.TP
+.B cluster_master_min_adv
+Determines the minumum number of up to date slaves required before the
+master will drop routes (default: 1).
+.TP
+.B ipv6_prefix
+Enable negotiation of IPv6.  This forms the the first 64 bits of the
+client allocated address.  The remaining 64 come from the allocated
+IPv4 address and 4 bytes of 0s.
 .RE
 .SS BGP ROUTING
 The routing configuration section is entered by the command
@@ -199,5 +236,121 @@ is the remote AS number and
 .IR keepalive ,
 .I hold
 are the timer values in seconds.
+.SS NAMED ACCESS LISTS
+Named access lists may be defined with either of
+.IP
+.BI "ip access\-list standard " name
+.br
+.BI "ip access\-list extended " name
+.PP
+Subsequent lines starting with
+.B permit
+or
+.B deny
+define the body of the access\-list.
+.PP
+.B Standard Access Lists
+.RS 4n
+Standard access lists are defined with:
+.IP
+.RB { permit | deny }
+.IR source " [" dest ]
+.PP
+Where
+.I source
+and
+.I dest
+specify IP matches using one of:
+.IP
+.I address
+.I wildard
+.br
+.B host
+.I address
+.br
+.B any
+.PP
+.I address
+and
+.I wildard
+are in dotted-quad notation, bits in the
+.I wildard
+indicate which address bits in
+.I address
+are relevant to the match (0 = exact match; 1 = don't care).
+.PP
+The shorthand
+.RB ' host
+.IR address '
+is equivalent to
+.RI ' address
+.BR 0.0.0.0 ';
+.RB ' any '
+to
+.RB ' 0.0.0.0
+.BR 255.255.255.255 '.
+.RE
+.PP
+.B Extended Access Lists
+.RS 4n
+Extended access lists are defined with:
+.IP
+.RB { permit | deny }
+.I proto
+.IR source " [" ports "] " dest " [" ports "] [" flags ]
+.PP
+Where
+.I proto
+is one of
+.BR ip ,
+.B tcp
+or
+.BR udp ,
+and
+.I source
+and
+.I dest
+are as described above for standard lists.
+.PP
+For TCP and UDP matches, source and destination may be optionally
+followed by a
+.I ports
+specification:
+.IP
+.RB { eq | neq | gt | lt }
+.I port
+.br
+.B
+range
+.I from to
+.PP
+.I flags
+may be one of:
+.RS
+.HP
+.RB { match\-any | match\-all }
+.RB { + | - }{ fin | syn | rst | psh | ack | urg }
+\&...
+.br
+Match packets with any or all of the tcp flags set
+.RB ( + )
+or clear
+.RB ( - ).
+.HP
+.B established
+.br
+Match "established" TCP connections:  packets with
+.B RST
+or
+.B ACK
+set, and
+.B SYN
+clear.
+.HP
+.B fragments
+.br
+Match IP fragments.  May not be specified on rules with layer 4
+matches.
+.RE
 .SH SEE ALSO
 .BR l2tpns (8)