// via BGP if enabled, and stuffs it into the
// 'sessionbyip' cache.
//
-// 'ip' and 'mask' must be in _host_ order.
+// 'ip' must be in _host_ order.
//
-static void routeset(sessionidt s, in_addr_t ip, in_addr_t mask, in_addr_t gw, int add)
+static void routeset(sessionidt s, in_addr_t ip, int prefixlen, in_addr_t gw, int add)
{
struct rtentry r;
+ in_addr_t mask;
int i;
- if (!mask) mask = 0xffffffff;
+ if (!prefixlen) prefixlen = 32;
- ip &= mask; // Force the ip to be the first one in the route.
+ mask = 0xffffffff << (32 - prefixlen);
+
+ ip &= mask; // Force the ip to be the first one in the route.
memset(&r, 0, sizeof(r));
r.rt_dev = config->tundevice;
r.rt_flags = (RTF_UP | RTF_STATIC);
if (gw)
r.rt_flags |= RTF_GATEWAY;
- else if (mask == 0xffffffff)
+ else if (prefixlen == 32)
r.rt_flags |= RTF_HOST;
- LOG(1, s, 0, "Route %s %s/%s%s%s\n", add ? "add" : "del",
- fmtaddr(htonl(ip), 0), fmtaddr(htonl(mask), 1),
+ LOG(1, s, 0, "Route %s %s/%d%s%s\n", add ? "add" : "del",
+ fmtaddr(htonl(ip), 0), prefixlen,
gw ? " via" : "", gw ? fmtaddr(htonl(gw), 2) : "");
if (ioctl(ifrfd, add ? SIOCADDRT : SIOCDELRT, (void *) &r) < 0)
#ifdef BGP
if (add)
- bgp_add_route(htonl(ip), htonl(mask));
+ bgp_add_route(htonl(ip), prefixlen);
else
- bgp_del_route(htonl(ip), htonl(mask));
+ bgp_del_route(htonl(ip), prefixlen);
#endif /* BGP */
// Add/Remove the IPs to the 'sessionbyip' cache.
if (!add) // Are we deleting a route?
s = 0; // Caching the session as '0' is the same as uncaching.
- for (i = ip; (i&mask) == (ip&mask) ; ++i)
+ for (i = ip; i < ip+(1<<(32-prefixlen)) ; ++i)
cache_ipmap(i, s);
}
}
return recvmsg(nlfd, &msg, 0);
}
+/* adapted from iproute2 */
+void netlink_addattr(struct nlmsghdr *nh, int type, const void *data, int alen)
+{
+ int len = RTA_LENGTH(alen);
+ struct rtattr *rta;
+
+ rta = (struct rtattr *)(((void *)nh) + NLMSG_ALIGN(nh->nlmsg_len));
+ rta->rta_type = type;
+ rta->rta_len = len;
+ memcpy(RTA_DATA(rta), data, alen);
+ nh->nlmsg_len = NLMSG_ALIGN(nh->nlmsg_len) + RTA_ALIGN(len);
+}
+
// messages corresponding to different phases seq number
static char *tun_nl_phase_msg[] = {
"initialized",
req.nh.nlmsg_type = RTM_GETLINK;
req.nh.nlmsg_flags = NLM_F_REQUEST;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifinfo));
req.ifinfo.ifi_family = AF_UNSPEC; // as the man says
- req.ifname_rta.rta_len = RTA_LENGTH(strlen(config->tundevice)+1);
- req.ifname_rta.rta_type = IFLA_IFNAME;
- strncpy(req.ifname, config->tundevice, IFNAMSIZ-1);
-
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifinfo)
- + req.ifname_rta.rta_len);
+ netlink_addattr(&req.nh, IFLA_IFNAME, config->tundevice, strlen(config->tundevice)+1);
if(netlink_send(&req.nh) < 0 || (len = netlink_recv(buf, sizeof(buf))) < 0)
{
} ifmsg __attribute__ ((aligned(NLMSG_ALIGNTO)));
char rtdata[32]; // 32 should be enough
} req;
- struct {
- struct rtattr rta;
- uint32_t u32 __attribute__ ((aligned(RTA_ALIGNTO)));;
- } u32_attr;
- struct {
- struct rtattr rta;
- struct in_addr addr __attribute__ ((aligned(RTA_ALIGNTO)));;
- } ipv4_attr;
- struct {
- struct rtattr rta;
- struct in6_addr addr6 __attribute__ ((aligned(RTA_ALIGNTO)));;
- } ipv6_attr;
- char *buf_ptr;
+ uint32_t txqlen, mtu;
+ struct in_addr ip;
memset(&req, 0, sizeof(req));
req.nh.nlmsg_type = RTM_SETLINK;
req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_MULTI;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifinfo));
req.ifmsg.ifinfo = ifinfo;
req.ifmsg.ifinfo.ifi_flags |= IFF_UP; // set interface up
req.ifmsg.ifinfo.ifi_change = IFF_UP; // only change this flag
- buf_ptr = NLMSG_DATA(&req.nh) + sizeof(req.ifmsg.ifinfo);
-
- u32_attr.rta.rta_len = RTA_LENGTH(sizeof(u32_attr.u32));
- u32_attr.rta.rta_type = IFLA_TXQLEN;
/* Bump up the qlen to deal with bursts from the network */
- u32_attr.u32 = 1000;
- memcpy(buf_ptr, &u32_attr, sizeof(u32_attr));
-
- buf_ptr += RTA_ALIGN(u32_attr.rta.rta_len);
-
- u32_attr.rta.rta_len = RTA_LENGTH(sizeof(u32_attr.u32));
- u32_attr.rta.rta_type = IFLA_MTU;
+ txqlen = 1000;
+ netlink_addattr(&req.nh, IFLA_TXQLEN, &txqlen, sizeof(txqlen));
/* set MTU to modem MRU */
- u32_attr.u32 = MRU;
- memcpy(buf_ptr, &u32_attr, sizeof(u32_attr));
-
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifinfo)
- + u32_attr.rta.rta_len * 2);
+ mtu = MRU;
+ netlink_addattr(&req.nh, IFLA_MTU, &mtu, sizeof(mtu));
if (netlink_send(&req.nh) < 0)
- {
- LOG(0, 0, 0, "Error setting up tun device interface: %s\n", strerror(errno));
- exit(1);
- }
+ goto senderror;
memset(&req, 0, sizeof(req));
req.nh.nlmsg_type = RTM_NEWADDR;
req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_MULTI;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr));
req.ifmsg.ifaddr.ifa_family = AF_INET;
req.ifmsg.ifaddr.ifa_prefixlen = 32;
req.ifmsg.ifaddr.ifa_index = ifinfo.ifi_index;
- ipv4_attr.rta.rta_len = RTA_LENGTH(sizeof(ipv4_attr.addr));
- ipv4_attr.rta.rta_type = IFA_LOCAL;
- ipv4_attr.addr.s_addr = config->bind_address ?
- config->bind_address : 0x01010101; // 1.1.1.1
- memcpy(NLMSG_DATA(&req.nh) + sizeof(req.ifmsg.ifaddr), &ipv4_attr, sizeof(ipv4_attr));
-
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr)
- + ipv4_attr.rta.rta_len);
+ if (config->bind_address)
+ ip.s_addr = config->bind_address;
+ else
+ ip.s_addr = 0x01010101, // 1.1.1.1
+ netlink_addattr(&req.nh, IFA_LOCAL, &ip, sizeof(ip));
if (netlink_send(&req.nh) < 0)
- {
- LOG(0, 0, 0, "Error setting up tun device IPv4 address: %s\n", strerror(errno));
- exit(1);
- }
+ goto senderror;
// Only setup IPv6 on the tun device if we have a configured prefix
if (config->ipv6_prefix.s6_addr[0]) {
+ struct in6_addr ip6;
+
memset(&req, 0, sizeof(req));
req.nh.nlmsg_type = RTM_NEWADDR;
req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_MULTI;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr));
req.ifmsg.ifaddr.ifa_family = AF_INET6;
req.ifmsg.ifaddr.ifa_prefixlen = 64;
req.ifmsg.ifaddr.ifa_scope = RT_SCOPE_LINK;
req.ifmsg.ifaddr.ifa_index = ifinfo.ifi_index;
- ipv6_attr.rta.rta_len = RTA_LENGTH(sizeof(ipv6_attr.addr6));
- ipv6_attr.rta.rta_type = IFA_LOCAL;
// Link local address is FE80::1
- memset(&ipv6_attr.addr6, 0, sizeof(ipv6_attr.addr6));
- ipv6_attr.addr6.s6_addr[0] = 0xFE;
- ipv6_attr.addr6.s6_addr[1] = 0x80;
- ipv6_attr.addr6.s6_addr[15] = 1;
- memcpy(NLMSG_DATA(&req.nh) + sizeof(req.ifmsg.ifaddr), &ipv6_attr, sizeof(ipv6_attr));
-
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr)
- + ipv6_attr.rta.rta_len);
+ memset(&ip6, 0, sizeof(ip6));
+ ip6.s6_addr[0] = 0xFE;
+ ip6.s6_addr[1] = 0x80;
+ ip6.s6_addr[15] = 1;
+ netlink_addattr(&req.nh, IFA_LOCAL, &ip6, sizeof(ip6));
if (netlink_send(&req.nh) < 0)
- {
- LOG(0, 0, 0, "Error setting up tun device IPv6 LL address: %s\n", strerror(errno));
- exit(1);
- }
+ goto senderror;
memset(&req, 0, sizeof(req));
req.nh.nlmsg_type = RTM_NEWADDR;
req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_MULTI;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr));
req.ifmsg.ifaddr.ifa_family = AF_INET6;
req.ifmsg.ifaddr.ifa_prefixlen = 64;
req.ifmsg.ifaddr.ifa_scope = RT_SCOPE_UNIVERSE;
req.ifmsg.ifaddr.ifa_index = ifinfo.ifi_index;
- ipv6_attr.rta.rta_len = RTA_LENGTH(sizeof(ipv6_attr.addr6));
- ipv6_attr.rta.rta_type = IFA_LOCAL;
// Global address is prefix::1
- ipv6_attr.addr6 = config->ipv6_prefix;
- ipv6_attr.addr6.s6_addr[15] = 1;
- memcpy(NLMSG_DATA(&req.nh) + sizeof(req.ifmsg.ifaddr), &ipv6_attr, sizeof(ipv6_attr));
-
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.ifmsg.ifaddr)
- + ipv6_attr.rta.rta_len);
+ ip6 = config->ipv6_prefix;
+ ip6.s6_addr[15] = 1;
+ netlink_addattr(&req.nh, IFA_LOCAL, &ip6, sizeof(ip6));
if (netlink_send(&req.nh) < 0)
- {
- LOG(0, 0, 0, "Error setting up tun device IPv6 global address: %s\n", strerror(errno));
- exit(1);
- }
+ goto senderror;
}
memset(&req, 0, sizeof(req));
req.nh.nlmsg_len = NLMSG_LENGTH(0);
if (netlink_send(&req.nh) < 0)
- {
- LOG(0, 0, 0, "Error finishing setting up tun device: %s\n", strerror(errno));
- exit(1);
- }
+ goto senderror;
// if we get an error for seqnum < min_initok_nlseqnum,
// we must exit as initialization went wrong
else
min_initok_nlseqnum = 3 + 1; // idx + if + addr
}
+
+ return;
+
+senderror:
+ LOG(0, 0, 0, "Error while setting up tun device: %s\n", strerror(errno));
+ exit(1);
}
// set up UDP ports
int routed = 0;
for (r = 0; r < MAXROUTE && session[s].route[r].ip; r++)
{
- if ((session[s].ip & session[s].route[r].mask) ==
- (session[s].route[r].ip & session[s].route[r].mask))
+ if ((session[s].ip >> (32-session[s].route[r].prefixlen)) ==
+ (session[s].route[r].ip >> (32-session[s].route[r].prefixlen)))
routed++;
- if (del_routes) routeset(s, session[s].route[r].ip, session[s].route[r].mask, 0, 0);
+ if (del_routes) routeset(s, session[s].route[r].ip, session[s].route[r].prefixlen, 0, 0);
session[s].route[r].ip = 0;
}
//
// Add a block of addresses to the IP pool to hand out.
//
-static void add_to_ip_pool(in_addr_t addr, in_addr_t mask)
+static void add_to_ip_pool(in_addr_t addr, int prefixlen)
{
int i;
- if (mask == 0)
- mask = 0xffffffff; // Host route only.
+ if (prefixlen == 0)
+ prefixlen = 32; // Host route only.
- addr &= mask;
+ addr &= 0xffffffff << (32 - prefixlen);
if (ip_pool_size >= MAXIPPOOL) // Pool is full!
return ;
- for (i = addr ;(i & mask) == addr; ++i)
+ for (i = addr ; i < addr+(1<<(32-prefixlen)); ++i)
{
if ((i & 0xff) == 0 || (i&0xff) == 255)
continue; // Skip 0 and broadcast addresses.
{
// It's a range
int numbits = 0;
- in_addr_t start = 0, mask = 0;
+ in_addr_t start = 0;
LOG(2, 0, 0, "Adding IP address range %s\n", buf);
*p++ = 0;
continue;
}
start = ntohl(inet_addr(pool));
- mask = (in_addr_t) (pow(2, numbits) - 1) << (32 - numbits);
// Add a static route for this pool
- LOG(5, 0, 0, "Adding route for address pool %s/%u\n",
- fmtaddr(htonl(start), 0), 32 + mask);
+ LOG(5, 0, 0, "Adding route for address pool %s/%d\n",
+ fmtaddr(htonl(start), 0), numbits);
- routeset(0, start, mask, 0, 1);
+ routeset(0, start, numbits, 0, 1);
- add_to_ip_pool(start, mask);
+ add_to_ip_pool(start, numbits);
}
else
{
// Add the route for this session.
for (r = 0; r < MAXROUTE && session[s].route[r].ip; r++)
{
- if ((session[s].ip & session[s].route[r].mask) ==
- (session[s].route[r].ip & session[s].route[r].mask))
+ if ((session[s].ip >> (32-session[s].route[r].prefixlen)) ==
+ (session[s].route[r].ip >> (32-session[s].route[r].prefixlen)))
routed++;
- routeset(s, session[s].route[r].ip, session[s].route[r].mask, 0, 1);
+ routeset(s, session[s].route[r].ip, session[s].route[r].prefixlen, 0, 1);
}
// Static IPs need to be routed if not already
for (i = 0; !newip && i < MAXROUTE && (session[s].route[i].ip || new->route[i].ip); i++)
if (new->route[i].ip != session[s].route[i].ip ||
- new->route[i].mask != session[s].route[i].mask)
+ new->route[i].prefixlen != session[s].route[i].prefixlen)
newip++;
// needs update
// remove old routes...
for (i = 0; i < MAXROUTE && session[s].route[i].ip; i++)
{
- if ((session[s].ip & session[s].route[i].mask) ==
- (session[s].route[i].ip & session[s].route[i].mask))
+ if ((session[s].ip >> (32-session[s].route[i].prefixlen)) ==
+ (session[s].route[i].ip >> (32-session[s].route[i].prefixlen)))
routed++;
- routeset(s, session[s].route[i].ip, session[s].route[i].mask, 0, 0);
+ routeset(s, session[s].route[i].ip, session[s].route[i].prefixlen, 0, 0);
}
// ...ip
// add new routes...
for (i = 0; i < MAXROUTE && new->route[i].ip; i++)
{
- if ((new->ip & new->route[i].mask) ==
- (new->route[i].ip & new->route[i].mask))
+ if ((new->ip >> (32-new->route[i].prefixlen)) ==
+ (new->route[i].ip >> (32-new->route[i].prefixlen)))
routed++;
- routeset(s, new->route[i].ip, new->route[i].mask, 0, 1);
+ routeset(s, new->route[i].ip, new->route[i].prefixlen, 0, 1);
}
// ...ip
projects / l2tpns.git / blobdiff