*** empty log message ***

[l2tpns.git] / Docs / startup-config.5

diff --git a/Docs/startup-config.5 b/Docs/startup-config.5
index f4ea27e..7b3655f 100644 (file)
--- a/Docs/startup-config.5
+++ b/Docs/startup-config.5
@@ -2,7 +2,7 @@
 .de Id
 .ds Dt \\$4 \\$5
 ..
-.Id $Id: startup-config.5,v 1.6 2005/05/10 08:11:29 bodea Exp $
+.Id $Id: startup-config.5,v 1.12 2005/07/31 10:04:14 bodea Exp $
 .TH STARTUP-CONFIG 5 "\*(Dt" L2TPNS "File Formats and Conventions"
 .SH NAME
 startup\-config \- configuration file for l2tpns
@@ -63,6 +63,16 @@ for authenticating tunnel request.  Must be the same as the LAC, or
 authentication will fail.  Only actually be used if the LAC requests
 authentication.
 .TP
+.B ppp_restart_time
+Restart timer for PPP protocol negotiation in seconds (default: 3).
+.TP
+.B ppp_max_configure
+Number of configure requests to send before giving up (default: 10).
+.TP
+.B ppp_max_failure
+Number of Configure-Nak requests to send before sending a
+Configure-Reject (default: 5).
+.TP
 .BR primary_dns , " secondary_dns"
 Whenever a PPP connection is established, DNS servers will be sent to the
 user, both a primary and a secondary.  If either is set to 0.0.0.0, then that
@@ -91,10 +101,7 @@ record when the session is closed.
 If
 .B radius_accounting
 is on, defines the interval between sending of RADIUS interim
-accounting records (in seconds).  Note: checking of this interval
-occurs no more frequently than
-.B cleanup_interval
-seconds (see below).
+accounting records (in seconds).
 .TP
 .B radius_secret
 Secret to be used in RADIUS packets.
@@ -103,6 +110,15 @@ Secret to be used in RADIUS packets.
 A comma separated list of supported RADIUS authentication methods
 ("pap" or "chap"), in order of preference (default "pap").
 .TP
+.B radius_dae_port
+Port for DAE RADIUS (Packet of Death/Disconnect, Change of Authorization)
+requests (default: 3799).
+.TP
+.B allow_duplicate_users
+Allow multiple logins with the same username.  If false (the default),
+any prior session with the same username will be dropped when a new
+session is established.
+.TP
 .B bind_address
 When the tun interface is created, it is assigned the address
 specified here.  If no address is given, 1.1.1.1 is used.  Packets
@@ -140,9 +156,6 @@ by running the
 .B uptime
 command on the CLI.
 .TP
-.B cleanup_interval
-Interval between regular cleanups (in seconds).
-.TP
 .B multi_read_count
 Number of packets to read off each of the UDP and TUN fds when
 returned as readable by select (default: 10).  Avoids incurring the
@@ -189,8 +202,14 @@ Cluster heartbeat timeout in tenths of a second.  A new master will be
 elected when this interval has been passed without seeing a heartbeat
 from the master.
 .TP
+.B cluster_master_min_adv
+Determines the minumum number of up to date slaves required before the
+master will drop routes (default: 1).
+.TP
 .B ipv6_prefix
-TODO: Noodles
+Enable negotiation of IPv6.  This forms the the first 64 bits of the
+client allocated address.  The remaining 64 come from the allocated
+IPv4 address and 4 bytes of 0s.
 .RE
 .SS BGP ROUTING
 The routing configuration section is entered by the command