.de Id
.ds Dt \\$4 \\$5
..
-.Id $Id: startup-config.5,v 1.6 2005/05/10 08:11:29 bodea Exp $
+.Id $Id: startup-config.5,v 1.17 2006/04/27 14:38:14 bodea Exp $
.TH STARTUP-CONFIG 5 "\*(Dt" L2TPNS "File Formats and Conventions"
.SH NAME
startup\-config \- configuration file for l2tpns
authentication will fail. Only actually be used if the LAC requests
authentication.
.TP
+.B l2tp_mtu
+MTU of interface for L2TP traffic (default: 1500). Used to set link
+MRU and adjust TCP MSS.
+.TP
+.B ppp_restart_time
+Restart timer for PPP protocol negotiation in seconds (default: 3).
+.TP
+.B ppp_max_configure
+Number of configure requests to send before giving up (default: 10).
+.TP
+.B ppp_max_failure
+Number of Configure-Nak requests to send before sending a
+Configure-Reject (default: 5).
+.TP
.BR primary_dns , " secondary_dns"
Whenever a PPP connection is established, DNS servers will be sent to the
user, both a primary and a secondary. If either is set to 0.0.0.0, then that
If
.B radius_accounting
is on, defines the interval between sending of RADIUS interim
-accounting records (in seconds). Note: checking of this interval
-occurs no more frequently than
-.B cleanup_interval
-seconds (see below).
+accounting records (in seconds).
.TP
.B radius_secret
Secret to be used in RADIUS packets.
A comma separated list of supported RADIUS authentication methods
("pap" or "chap"), in order of preference (default "pap").
.TP
+.B radius_dae_port
+Port for DAE RADIUS (Packet of Death/Disconnect, Change of Authorization)
+requests (default: 3799).
+.TP
+.B allow_duplicate_users
+Allow multiple logins with the same username. If false (the default),
+any prior session with the same username will be dropped when a new
+session is established.
+.TP
+.B guest_account
+Allow multiple logins matching this specific username.
+.TP
.B bind_address
When the tun interface is created, it is assigned the address
specified here. If no address is given, 1.1.1.1 is used. Packets
If set to a directory, then every 5 minutes the current usage for
every connected use will be dumped to a file in this directory.
.TP
-.B setuid
-After starting up and binding the interface, change UID to this. This
-doesn't work properly.
-.TP
.B dump_speed
If set to true, then the current bandwidth utilization will be logged
every second. Even if this is disabled, you can see this information
.B uptime
command on the CLI.
.TP
-.B cleanup_interval
-Interval between regular cleanups (in seconds).
-.TP
.B multi_read_count
Number of packets to read off each of the UDP and TUN fds when
returned as readable by select (default: 10). Avoids incurring the
.B cluster_interface
Interface for cluster packets (default: eth0).
.TP
+.B cluster_mcast_ttl
+TTL for multicast packets (default: 1).
+.TP
.B cluster_hb_interval
Interval in tenths of a second between cluster heartbeat/pings.
.TP
elected when this interval has been passed without seeing a heartbeat
from the master.
.TP
+.B cluster_master_min_adv
+Determines the minumum number of up to date slaves required before the
+master will drop routes (default: 1).
+.TP
.B ipv6_prefix
-TODO: Noodles
+Enable negotiation of IPv6. This forms the the first 64 bits of the
+client allocated address. The remaining 64 come from the allocated
+IPv4 address and 4 bytes of 0s.
.RE
.SS BGP ROUTING
The routing configuration section is entered by the command
projects / l2tpns.git / blobdiff