make MRU configurable, NAK config requests for larger values

[l2tpns.git] / Docs / manual.html

diff --git a/Docs/manual.html b/Docs/manual.html
index 1fe4694..a963e19 100644 (file)
--- a/Docs/manual.html
+++ b/Docs/manual.html
@@ -188,10 +188,14 @@ used if the LAC requests authentication.
 <LI><B>ppp_restart_time</B> (int)<BR>
 <B>ppp_max_configure</B> (int)<BR>
 <B>ppp_max_failure</B> (int)<BR>
-PPP counters and timers values, as described in &sect;4.1 of
+PPP counter and timer values, as described in &sect;4.1 of
 <a href="ftp://ftp.rfc-editor.org/in-notes/rfc1661.txt">RFC1661</a>.
 </LI>
 
+<LI><B>ppp_mru</B> (int)<BR>
+PPP link MRU (default: 1452).
+</LI>
+
 <LI><B>primary_dns</B> (ip address)
 <LI><B>secondary_dns</B> (ip address)<BR>
 Whenever a PPP connection is established, DNS servers will be sent to the
@@ -335,6 +339,10 @@ on <A HREF="#Clustering">Clustering</A> for more information.
 Interface for cluster packets (default: eth0).
 </LI>
 
+<LI><B>cluster_mcast_ttl</B> (int)<BR>
+TTL for multicast packets (default: 1).
+</LI>
+
 <LI><B>cluster_hb_interval</B> (int)<BR>
 Interval in tenths of a second between cluster heartbeat/pings.
 </LI>