only poll clifd if successfully bound

[l2tpns.git] / Changes

* Mon Apr 24 2006 Brendan O'Dea <bod@optus.net> 2.1.19
- Only poll clifd if successfully bound.

* Tue Apr 18 2006 Brendan O'Dea <bod@optus.net> 2.1.18
- Don't shutdown on TerminateReq, wait for CDN.
- Interpret "local" direction correctly (as LAC) in disconnect AVPs.

* Thu Apr 13 2006 Brendan O'Dea <bod@optus.net> 2.1.17
- Fix IPCP length test to allow Terminate-Request (4 bytes).
- Send nsctl responses back using the correct source address (thanks ltd).
- Similarly set the source for DAE responses; use bind_address when
  handling forwarded packets on the master.
- Add Acct-Terminate-Cause to RADIUS stop records.

* Thu Feb 23 2006 Brendan O'Dea <bod@optus.net> 2.1.16
- Send configured magic-no in LCP EchoReq when LCP is opened.
- Correct addition of single IP to pool (Jonathan Yarden).
- Ensure session changes from LCP ConfigReq/ConfigNak are sent to cluster.
- Verify that RADIUS packets come from a configured server (Jonathan Yarden).
- Avoid endless loop in processipcp, processipv6cp.
- Additional length checks in processlcp.
- Allow peer to request a new magic-number, or to disable magic-numbers.
- Decrease ip_conntrack_tcp_timeout_established to 5hrs (table filling).

* Mon Dec 19 2005 Brendan O'Dea <bod@optus.net> 2.1.15
- Drop backtrace.
- Reduce logging of LCP EchoReply packets.
- Break LCP configure loop with shutdown.
- Limit value of MRU of 1492 (rfc2516).
- Tun MTU should be MRU (not MRU+4).
- Add Service-Type/Framed-Protocol to RADIUS records (Paul Martin).

* Fri Dec 9 2005 Brendan O'Dea <bod@optus.net> 2.1.14
- Run PLUGIN_RADIUS_ACCOUNT for Start records.

* Wed Dec 7 2005 Brendan O'Dea <bod@optus.net> 2.1.13
- Add test/ping-sweep.
- Apply spec changes from Charlie Brady: use License header, change
  BuildRoot to include username.
- Fix IPCP negotiation of secondary DNS server, reported by Jon Morby.
- Clean up sessiont, removing some unused fields.
- Remove unused "MAC" config type.
- Reject unknown/unconfigured protocols on the master.
- Sanity check MRU before using in ppp_code_rej, protoreject.

* Thu Nov 17 2005 Brendan O'Dea <bod@optus.net> 2.1.12
- Set MTU on tunnel interface so the kernel will re-fragment large
  packets to within MRU.
- Fix TCP checksum recalc.
- NAK silly MRU values from peer.

* Mon Nov 14 2005 Brendan O'Dea <bod@optus.net> 2.1.11
- Fix fragment handling in ip_filter.
- Exclude counter when comparing filter rules.

* Sat Nov 5 2005 Brendan O'Dea <bod@optus.net> 2.1.10
- Add scripts/l2tpns-capture.
- Fix LCP Echo frequency.
- Add Framed-Route entries to RADIUS records.
- Reset restart counters correctly.
- Reset timers on sending ConfigReq.
- Only send one RADIUS Start record, even if IPCP is restarted.

* Tue Oct 11 2005 Brendan O'Dea <bod@optus.net> 2.1.9
- Fix Calling-Station-Id in RADIUS accounting records (Slobodan Tomic).
- Fix RADIUS authentication on DAE responses.
- Don't send tunnel HELLO when there are pending control messages.
- Move plugin_radius_reset from *ctl to auto* plugins.
- Add Cisco-AVPairs to RADIUS accounting records via plugin_radius_account.

* Mon Sep 19 2005 Brendan O'Dea <bod@optus.net> 2.1.8
- Move code from signal handlers into mainloop, avoiding a race
  condition when forking CLI.

* Fri Sep 16 2005 Brendan O'Dea <bod@optus.net> 2.1.7
- This time, for sure: really fix Protocol-Reject.

* Fri Sep 16 2005 Brendan O'Dea <bod@optus.net> 2.1.6
- Any traffic on a tunnel resets lastrec, not just control messages.
- Use a unique identifier for LCP.
- Fix Code-Reject/Protocol-Reject.
- Add l2tp_mtu configuration option, used to define MRU, MSS.
- Adjust TCP MSS options in SYN and SYN,ACK packets to avoid
  fragmentation of tcp packets.

* Sat Sep 3 2005 Brendan O'Dea <bod@optus.net> 2.1.5
- Avoid Code-Reject loop.
- Increase size of PPP buffers to MAXETHER.
- Bug fixes for CLI ringbuffer and tunnel HELLO from Yuri.
- Restart rather than halt BGP on receipt of CEASE (Dominique Rousseau).
- Add cluster_mcast_ttl option to allow a cluster to span multiple
  subnets (suggested by Tim Devries).

* Mon Aug 29 2005 Brendan O'Dea <bod@optus.net> 2.1.4
- Drop level of "Unexpected CHAP message" log.
- Fix parsing of ProtocolRej (allow 1 or two byte protocols).
- Handle rejection of MRU negotiation by peer.
- Use local hostname for tunnel in SCCRP (Alex Kiernan).

* Wed Aug 17 2005 Brendan O'Dea <bod@optus.net> 2.1.3
- Fail IPCP negotiation only on ConfigRej of IP-Address.

* Wed Aug 10 2005 Brendan O'Dea <bod@optus.net> 2.1.2
- Clear cluster_master on election so that slaves will accept a new master.
- Provide more comments/defaults in etc/startup-config.default.
- Add DAE support (PoD/CoA) from Vladislav Bjelic.
- Clean up new warnings from gcc 4.0.
- Replace flags used for LCP/IPCP with state machine.
- Include Acct-Session-Time in interim records.
- Fix DAE vector, generateload (Alex Kiernan).
- Replace RSA MD5 with public domain version.

* Tue Jun 14 2005 Brendan O'Dea <bod@optusnet.com.au> 2.1.1
- Add missing newline to backtrace macro.
- Don't send CDN for each session when shutting down tunnels (this is
  implicit).
- Move tunnel shutdown from SIGQUIT signal handler to be run once from
  still_busy().  Reject new tunnels/sessions while in the process of
  shutting down.
- Clarify usage of shutdown signals in documentation.
- Always initialise PRNG.
- Sanity check length of random_vector.
- Fix segv in unhide_value.
- Ping new master when we get C_MASTER and delay next election to allow
  the unicast limp-along code to kick in if required.

* Sun Jun 5 2005 Brendan O'Dea <bod@optusnet.com.au> 2.1.0
- Add IPv6 support from Jonathan McDowell.
- Add CHAP support from Jordan Hrycaj.
- Add interim accounting support from Vladislav Bjelic.
- Negotiate MRU, default 1458 to avoid fragmentation.
- Sanity check that cluster_send_session is not called from a child
  process.
- Use bounds-checking lookup functions for string constants.
- Add enum for RADIUS codes.
- Make "call_" prefix implict in CSTAT() macro.
- Fix some format string problems.
- Remove "save_state" option.  Not maintained anymore; use clustering
  to retain state across restarts.
- Simplify AVP unhiding code.
- Add optional "username" parameter to ungarden control, allowing the
  username to be reset before going online.
- Add result/error codes and message to StopCCN when shutting down tunnels.
- Add result/error codes to CDN when shutting down sessions.  Sends 2/7
  (general error, try another LNS) when out of IP addresses, and 3
  (adminstrative) for everything else (suggestion from Chris Gates).
- Use cli_error() for error messages and help.
- Don't use LOG() macro in initdata() until the config struct has been
  allocated (uses config->debug).
- Initialise log_stream to stderr to catch errors before the config file
  is read.
- Make "show running-config" a privileged command (contains clear text
  shared secrets).
- Add sessionctl plugin to provide drop/kill via nsctl.
- New config option: allow_duplicate_users which determines whether
  or not to kill older sessions with the same username.
- Fix byte counters in accounting records.
- Add Acct-Output-Gigawords, Acct-Input-Gigawords attributes to RADIUS
  accounting packets.
- Fix icmp host unreachable to use router address.
- Include endpoint address in accounting dump files.
- Convert mainloop to use epoll rather than select.
- Add note about fragmentation in Docs/manual.html, and a sample
  iptables rule for MSS clamping.
- Merge 2.0.22:
  + Show session open time in "show session"/"show user" detailed output.
  + Have slaves with BGP configured drop BGP on receipt of a shutdown
    signal, but hang about for an additional 5s to process any remaining
    traffic.
  + Run regular_cleanups after processing the results of the select,
    looking at a sufficient slice of each table to ensure that all
    entries are examined at least once per second.
- Merge 2.0.21:
  + Cluster changes from Michael, intended to prevent a stray master
    from trashing a cluster:
    = Ignore heartbeats from peers claiming to be the master before the
      timeout on the old master has expired.
    = A master receiving a stray heartbeat sends a unicast HB back, which
      should cause the rogue to die due to the tie-breaker code.
    = Keep probing the master for late heartbeats.
    = Drop BGP as soon as we become master with the minumum required peers.
    = Any PING seen from a master forces an election (rather than just
      where basetime is zero).
    = A slave which receives a LASTSEEN message (presumably a restarted
      master) sends back new message type, C_MASTER which indicates the
      address of the current master.
  + New config option: cluster_master_min_adv which determines the minimum
    number of up to date slaves required before the master will drop
    routes.
- Merge 2.0.20:
  + Add handling of "throttle=N" RADIUS attributes.
  + Fix RADIUS indexing (should have 16K entries with 64 sockets).
- Merge 2.0.19:
  + Fix leak in session freelist when initial RADIUS session allocation
    fails.
- Merge 2.0.18:
  + Add a Cisco-Avpair with intercept details to RADIUS Start/Stop
    records.
- Merge 2.0.17:
  + Only send RADIUS stop record in sessionshutdown when there's an ip address.
  + Reset .die on master takeover (so that dying sessions don't have to
    hang around until the new master has the same uptime as the old one).
  + Update .last_packet in cluster_handle_bytes only when there have
    been bytes received from the modem (dead sessions were having the
    idle timeout reset by stray packets).
- Merge 2.0.16:
  + Ensure that sessionkill is not called on an unopened session (borks
    the freelist).
  + Bump MAXSESSION to 60K.
  + Fix off-by-one errors in session/tunnel initialisation and
    sessiont <-> sessionidt functions.
  + Use session[s].opened consistently when checking for in-use sessions
    (rather than session[s].tunnel).
  + Use <= cluster_highest_sessionid rather than < MAXSESSION in a
    couple of loops.
  + Don't kill a whole tunnel if we're out of sessions.
  + Change session[s].ip to 0 if set from RADIUS to 255.255.255.254;
    avoids the possibility that it will be interpreted as a valid IP
    address.
  + Avoid a possible buffer overflow in processpap.
  + Kill session if authentication was rejected.
- Merge 2.0.15:
  + More DoS prevention:  add packet_limit option to apply a hard limit
    to downstream packets per session.
  + Fix "clear counters".
  + Log "Accepted connection to CLI" at 4 when connection is from localhost
    to reduce noise in logs.
  + Show time since last counter reset in "show counters".
- Merge 2.0.14:
  + Throttle outgoing LASTSEEN packets to at most one per second for a
    given seq#.

* Fri Dec 17 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.13
- Better cluster master collision resolution: keep a counter of state
  changes, propagated in the heartbeats; the master with the highest #
  of changes (that has kept in contact with the LAC through the
  outage) prevails.
- Skip newlines in ringbuffer messages to CLI.
- Drop "Session N is closing" message level to 4; don't process PPPIP
  packets in this state.
- Use gzip --best for man pages, include pid_file in sample
  startup-config (from Jonathan's Debian package patches).
- Read multiple packets off cluster_sockfd as well as udpfd, tunfd in an
  attempt to avoid losing the cluster in high load (DoS) conditions.
- Add counters for select_called, multi_read_used and multi_read_exceeded.
- Compress logs.
- Retain counters of shutdown sessions to dump once per minute.
- Use standard uintN_t types for portability.

* Wed Dec 1 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.12
- The "This time, for sure!" release.
- Fix throttlectl plugin argument parsing.

* Wed Dec 1 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.11
- Don't send a RADIUS start record when ungardening on shutdown.

* Wed Dec 1 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.10
- Fix byte ordering of LCP header length (thanks Yuri).
- Increase ip_conntrack_max due to dropped packets.

* Tue Nov 30 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.9
- Revise CCP, send ConfigReq once only.
- Don't copy the old buffer into Config{Nak,Rej} LCP responses (oops);
  add length checks when appending.
- Do copy the identifier from the request and update length.
- Have makeppp print a backtrace on overflow.
- Check control serial before clearing window, prevents looping tunnel
  setup in some instances.
- Implement named access-lists which may be applied to a session
  either via Filter-Id RADIUS responses, or using the CLI.
- Drop ip address from LOG.
- autothrottle: revise parsing; ignore lcp:interface-config avpairs
  which don't start with serv[ice-policy].
- Add THANKS file.

* Sat Nov 20 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.8
- Ignore gateway address in Framed-Route (from Jonathan McDowell).
- Don't route Framed-IP-Address if contained in a Framed-Route.
- Call sessionshutdown() when a tunnel is dropped rather than
  sessionkill() to ensure that RADIUS stop records are sent.
- Cleanup: make a bunch of global functions/variables static.
- Remove reference to old -a command line argument.
- Add l2tpns(8) and nsctl(8) manpages from Jonathan McDowell.
- Add startup-config(5) manpage.
- Revise nsctl to allow arbitrary strings/args to be passed to plugins.
- Add snoopctl, throttlectl plugins.
- Fix deletion from linked list.
- Allow LCP re-negotiation after connection completes (thanks Yuri).

* Mon Nov 15 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.7
- Fix socket creation in host_unreachable() (thanks to Bjørn Augestad)
- Don't assume BGP peer sends back negotiated hold time, pick smallest

* Thu Nov 11 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.6
- Make BGP keepalive/hold time configurable
- Revise BGP config to use "router bgp AS" syntax (requires libcli >= 1.8.2)

* Tue Nov 9 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.5
- Handle routing properly in lone-master case 
- Fix intercepts:  don't double-snoop throttled customers, ensure
  byte/packet counts are only updated once
- Add a callback to allow plugins to fetch values from the running config

* Mon Nov 8 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.4
- Added setrxspeed plugin
- Added peer_address config option
- Rename wrapper macros to LOG()/LOG_HEX(), use p->log() in plugins
- Replace some PPP{PAP,CHAP} magic numebrs with constants
- Nak asyncmap (unless == 0)
- Bundle ConfigRej options
- Clean up initlcp handling

* Wed Nov 3 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.3
- Added support for hidden AVPs by Robert Clark
- l2tpns-chap-response.patch from Robert Clark
- Merge l2tpns-config-hostname.patch from Robert Clark
- l2tpns-dont-timeshift-unidirectional-traffic.patch from Robert Clark - Dump accounting data if cin OR cout is non-zero
- Don't write accounting files if no accounting dir is set - Yuri
- Fix checking for mmap success
- Renegotiate MRU - Yuri
- Take LCP ConfigReq length from the packet length field - Yuri
- Hostname set via command line not config
- Make number of throttle buckets configurable
- Shared_malloc returns NULL on failure
- Sync changes
- Unfsck 4->8 indenting change
- Use 2 seperate u16 values for throttle rate in/out
- Defer adding radius fds to the select loop until become_master

* Thu Sep 02 2004 David Parrish <david@dparrish.com> 2.0.2
- Combined LCP patches from Iain and Yuri. This should allow Windows 2k/XP
  clients to connect, as well Linksys DSL modems.
- Apply patch to fix -v option from Juergen Kammer.
- Makefile fix from Juergen Kammer to not overwrite existing config files on
  make install
- Configurable radius port patch from Juergen Kammer.
- Send my_address if no bind_address when doing IPCP
- Write pid file if filename is set
- Add startup script and monitor script from Yuri
- Some logging correctness fixes from Iain Wade
- Add support for LCP Ident and CallBack (rejection only) from Yuri
- Initiate LCP if not attempted by the client, or in renegotiation - Yuri
- Indentation and style cleanups
- Per-user upload and download throttle rates - Yuri
- Make autothrottle.so understand cisco lcp:interface-config - Yuri
- Show filter stats in show session - Yuri
- Cleanup from Michael to change sid to unique_id
- Add plugin to remove domain name from auth requests
- Add .spec file for RPM generation

* Tue Jul 13 2004 Brendan O'Dea <bod@optusnet.com.au> 2.0.1
- Update INSTALL, Docs/manual.html documentation.
- Add INTERNALS documentation.
- Add lock_pages option.
- TerminateAck fix from Yuri
- Adject cli_loop args for libcli 1.8.0
- Allow for backward compatabity in C_PING packets
- Don't send RADIUS stop messages from sessionshutdown when called from
  sessionkill.
- s/tap/tun/ .
- Fix for LASTSEEN breakage:  don't do anything in the CLI other than
  flag changes to be made by the parent.
- Split out master parts from cluster_check_master() into cluster_check_slaves().
- Set hostname in CLI prompt.
- Make cluster_hb_interval work; include interval/timeout in heartbeats
  so that a change on the master is propagated immediately to the slaves.
- Use fast heartbeats when there are slaves not up to date.
- Ensure basetime of shut down master is set to zero (prevent delayed election).
- Fix radius session leak on IPCP timeout.
- Fix some off-by-one errors in tunnel/session loops.
- Add "limp along" fix for when a slave drops temporarily from the mcast group.
- Rename l2tpns.cfg as startup-config to match CONFIGFILE.
- Update cli callbacks to work with libcli 1.6.
  This supports privileged and unprivileged commands, as well as a configuration
  mode.
- Add help for all cli commands.
- Add "show version" command.
- Fix uptime counter display.
- Fix nasty bug where cluster basetime can be set to 0 when sending initial
  heartbeat.
- Don't rmmod ip_conntrack, as this can take a lot of time.
- Re-order logging in routeset such that the action is given before any error.
- Use the correct gateway address when deleting routes.
- Remove any routes when address changes.
- Require authentication if telnet from remote ip.
- Require enable password always.
- Return error if show pool done on slave.
- We MUST immediately exit if we're the wrong master!

* Wed Jun 23 2004 David Parrish <david@dparrish.com> 2.0.0
- Major release
- Completely replace active/standby clustering with a new peer-to-peer
  clustering method which allows much greater throughput and is a lot more fault
  tolerant
- Add internal tbf implementation for throttling without relying on tc and
  kernel HTB
- Add support for iBGP and eBGP to advertise routes
- Add cli commands "show cluster", "show bgp", "show ipcache", "show throttle",
  "show tbf", "suspend bgp", "restart bgp", "show user"
- Interception destination must be set per-user
- If SMP machine, allow use of SCHED_FIFO, which should improve performance
- Added config option to send GARP at startup
- Added plugin_become_master and plugin_new_session_master plugin hooks
- Remove useless sessionsendarp(). This isn't needed now that we are using TUN
  instead of TAP.
- ICMP rate limiting so not every unreachable packet is replied with an ICMP
  unreachable message
- mangle table is not required on anything but the cluster master, so slaves
  will drop the mangle table and attempt to unload the ip_conntrack module
- Statically assigned IP addresses (by Radius) work now
- Add -d command-line flag to detach and become a daemon
- Configuration file is now "/etc/l2tpns/startup-config"
- Reduced MIN_IP_SIZE to 0x19 to stop a pile of Short IP warnings
- Resend initial IPCP request until it's acknowleged by the client
- Better radius session cleanup logic
- Many miscellaenous bugfixes and performance enhancements
- Thanks to Michael O'Reilly and Brendan O'Dea for most of these new features

* Mon May 24 2004 David Parrish <david@dparrish.com> 1.2.0
- Fix SEGFAULT in garden module
- Use multiple radius sockets to allow more concurrent authentication requests
- Add username parameter to "show users" command
- Fix counting tunnel rx errors as tunnel tx errors
- Add "show throttle" command
- Add gcc __attribute__ to logging functions
- Fix warnings shown by __attribute__
- Make sure regular cleanup happens regularly under high load
- Add variable cleanup_interval for changing cleanup interval
- Add support for reading more than one packet per fd in each processing loop
- This is configurable with the multi_read_count variable
- Remove segv handler so core dumps can happen
- Use nonblocking sockets
- Increase tun queue length
- Fix minimum length of IP packets
- Remove per-packet plugin hooks (they are slow)
- Don't drop session if no free RADIUS
- Don't expire more than 1000 sessions per cleanup interval
- Remove -a and -c command-line options. They don't work anyway
- Don't require file: in log_filename
- Bump version to 1.2.0
- Check return code when throttling users

* Mon Apr 5 2004 David Parrish <david@dparrish.com> 1.1.1
- Don't mention configure anymore, it's not used
- Added the autosnoop and autothrottle modules
- Don't default to using a htb for the class root

* Fri Mar 5 2004 David Parrish <david@dparrish.com> 1.1.0
- Change all strcpy() calls to strncpy() to avoid buffer overflow potential
- Add ICMP host unreachable support
- Logging to syslog if log_file = "syslog:facility"
- Now requires libcli 1.5
- All configuration moves to a config structure
- Ability to modify and write config on the fly through command-line interface
- Config file support is removed, and now handled by the cli
- Show hostname in cli prompt
- Keep current state type for tunnels
- Add uptime command do CLI, which also shows real-time bandwidth utilisation
- Add goodbye command to cluster master, which forces droppping a slave
- Cache IP address allocation, so that reconnecting users get the same address
- Fix tunnel resend timeouts, so that dead tunnels will be cleaned up
- Allocate tunnels and radius without using a linked list which had issues
- Fix some off-by-one errors in tunnel and session and radius arrays
- Save and reload ip address pool when dieing
- Check version and size of reloaded data when restarting
- Remove plugin_config support
- Remove old support for TBF which didn't work anyway. HTB is required to do throttling now.
- Add COPYING and Changes files